CHERRY DOLL HIGH CHAIR
MODEL NUMBER:
01017
Assembly Instructions.
Adult Assembly Required.
* Toys/accessories shown here are
not included. Product may vary from
what is shown.
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
Page 1 of 4
1.0/0908/TG
Gx1
TOOLS NEEDED:
Phillips Screwdriver
Bx1
A2x1*
A1x1*
PARTS INCLUDED:
(A1) 1 - Left Side Panel*
(A2) 1 - Right Side Panel*
(B) 1 - Seat Panel
(C) 10 - Short Screws
(D) 1 - Back Panel
(E) 1 - Tray
(F) 2 - Long Bolts
(G) 1 - Foot Rest Rail
(H) 1 - Bottom Rail
Hx1
*The countersunk hole on
each End Panel faces out
when assembled.
So, this determines which
panel is left and
Dx1
Fx2
which is right.
Cx10
Ex1
(J) 2 - Spacer Washers (not shown)
NOTE:
A WHITE HIGH CHAIR IS SHOWN
IN THE ASSEMBLY PHOTOS.
ALL PARTS AND ASSEMBLY STEPS ARE
THE SAME FOR THE CHERRY MODEL.
STEP 1 - PICTURE 1: Secure the SEAT PANEL (B), with the fabric side up, between the TWO SIDE
PANELS (A1, A2) using FOUR SHORT SCREWS (C).
STEP 2 - PICTURE 2: Secure the BACK PANEL (D) between the TWO SIDE PANELS (A1, A2) using
TWO SHORT SCREWS (C) in the TOP HOLES.
STEP 3 - PICTURE 3: Attach the TRAY (E) to the TWO SIDE PANELS (A1, A2) and BACK PANEL
(D) using TWO LONG BOLTS (F) and the TWO SPACER WASHERS (J). The spacer washers slip over
the bolts BETWEEN the TRAY and the SIDE PANEL so the tray can be lifted and lowered smoothly
without rubbing.
STEP 4 - PICTURES 4 & 5: Secure the FOOT REST RAIL (G) and BOTTOM RAIL (H) between the
TWO SIDE PANELS (A1, A2) using FOUR SHORT SCREWS (C). Your Doll High Chair is ready!
CARE INSTRUCTIONS:
Wipe the highchair clean with a damp cloth and mild soap as needed. The
fabric is poly/cotton. For longevity and to maintain the appearance of the
product, we recommend spot cleaning or hand wash and air dry as needed;
but you can machine wash cold, gentle cycle, and tumble dry on
low if desired.
Page 3 of 4
1.0/0908/TG
D
C
B
G
H
C
C
A1
A1
A1
A2
A2
A2
PICTURE 1
PICTURE 2
PICTURE 4
Remember to insert the
washers (J) over the bolts
(F) between the tray (E)
and panels A1 and A2.
D
E
A1
A2
F
PICTURE 3
* The plate/bib/spoon toys/accessories shown here are for
illustration purposes only and are not included with the product.
PICTURE 5*
Page 4 of 4
1.0/0908/TG
|
Alesis DJ Equipment Q20 User Manual
Alliance Laundry Systems Washer F232139R3 User Manual
Allied Telesis Switch at 9000 24 layer 2 gigabit ethernet switch User Manual
Alto Shaam Fryer ASF 60G User Manual
Alvin Indoor Furnishings LB1218 User Manual
Amana Refrigerator ASD2522VRW User Manual
American Standard Indoor Furnishings M968877 User Manual
Behringer Car Speaker VP1220 User Manual
Behringer Musical Instrument PMH660M PMH880S User Manual
Behringer Music Pedal HF300 User Manual