User Manual
GUITAR AMPLIFIER
GTX60
60-Watt Guitar Amplifier with 2 Independent Channels, FX, Tuner,
Tube Modeling and Original BUGERA 12" Speaker
GTX30
30-Watt Guitar Amplifier with 2 Channels, FX, Tuner,
Tube Modeling and Original BUGERA 12" Speaker
3
GUITAR AMPLIFIER GTX60/GTX30 User Manual
9. Do not defeat the safety purpose of the polarized
UNDERTAKING OR REPRESENTATION. THIS MANUAL
IS COPYRIGHTED. NO PART OF THIS MANUAL MAY
BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL,
Important Safety
Instructions
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the INCLUDING PHOTOCOPYING AND RECORDING OF ANY
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSIC GROUP IP LTD.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
ALL RIGHTS RESERVED.
© 2011 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146,
Road Town, Tortola, British Virgin Islands
Terminals marked with this symbol carry
electrical current of sufficient magnitude
to constitute risk of electric shock. Use only
11. Use only attachments/accessories specified by
the manufacturer.
high-quality commercially-available speaker cables with
1/ TS plugs pre-installed. All other installation or
modification should be performed only by
qualified personnel.
LIMITED WARRANTY
12. Use only with the
cart, stand, tripod, bracket,
or table specified by the
§ 1 Warranty
(1) This limited warranty is valid only if you purchased
the product from a MUSIC Group Authorized Reseller in
the country of purchase. A list of authorized resellers can
be found on BEHRINGER’s website behringer.com under
“Where to Buy“, or you can contact the MUSIC Group office
closest to you.
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
This symbol, wherever it appears,
alerts you to the presence of uninsulated
dangerous voltage inside the
enclosure - voltage that may be sufficient to constitute a
risk of shock.
injury from tip-over.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
(2) MUSIC Group* warrants the mechanical and
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
electronic components of this product to be free of defects
in material and workmanship if used under normal
operating conditions for a period of one (1) year from
the original date of purchase (see the Limited Warranty
terms in § 4 below), unless a longer minimum warranty
period is mandated by applicable local laws. If the product
shows any defects within the specified warranty period
and that defect is not excluded under § 4, MUSIC Group
shall, at its discretion, either replace or repair the product
using suitable new or reconditioned product or parts.
In case MUSIC Group decides to replace the entire product,
this limited warranty shall apply to the replacement
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do
not remove the top cover (or the rear
section). No user serviceable parts inside. Refer servicing
to qualified personnel.
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
Caution
To reduce the risk of fire or electric shock,
do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall product for the remaining initial warranty period, i.e.,
or splashing liquids and no objects filled with liquids, such remain readily operable.
as vases, shall be placed on the apparatus.
one (1) year (or otherwise applicable minimum warranty
period) from the date of purchase of the original product.
(3) Upon validation of the warranty claim, the repaired
or replacement product will be returned to the user freight
prepaid by MUSIC Group.
Caution
These service instructions are for use
by qualified service personnel only.
To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualified
service personnel.
(4) Warranty claims other than those indicated above
are expressly excluded.
PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF
OF PURCHASE COVERING YOUR LIMITED WARRANTY.
THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF
OF PURCHASE.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
LEGAL DISCLAIMER
TECHNICAL SPECIFICATIONS AND APPEARANCE
ARE SUBJECT TO CHANGE WITHOUT NOTICE.
THE INFORMATION CONTAINED HEREIN IS CORRECT
AT THE TIME OF PRINTING. ALL TRADEMARKS ARE
THE PROPERTY OF THEIR RESPECTIVE OWNERS.
MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY
LOSS WHICH MAY BE SUFFERED BY ANY PERSON
WHO RELIES EITHER WHOLLY OR IN PART UPON
ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT
CONTAINED HEREIN. COLORS AND SPECIFICATIONS
MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP
PRODUCTS ARE SOLD THROUGH AUTHORIZED
FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND
RESELLERS ARE NOT AGENTS OF MUSIC GROUP
AND HAVE ABSOLUTELY NO AUTHORITY TO BIND
MUSIC GROUP BY ANY EXPRESS OR IMPLIED
§ 2 Online registration
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
Please do remember to register your new BEHRINGER
equipment right after your purchase at behringer.com
under“Support”and kindly read the terms and conditions
of our limited warranty carefully. Registering your
purchase and equipment with us helps us process
your repair claims quicker and more efficiently.
Thank you for your cooperation!
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
§ 3 Return materials authorization
(1) To obtain warranty service, please contact the
retailer from whom the equipment was purchased.
Should your MUSIC Group Authorized Reseller not be
located in your vicinity, you may contact the MUSIC Group
Authorized Fulfiller for your country listed under
4
GUITAR AMPLIFIER GTX60/GTX30 User Manual
“Support”at behringer.com. If your country is not
listed, please check if your problem can be dealt with
by our“Online Support”which may also be found under
“Support”at behringer.com. Alternatively, please submit
an online warranty claim at behringer.com BEFORE
returning the product. All inquiries must be accompanied
by a description of the problem and the serial number
of the product. After verifying the product’s warranty
eligibility with the original sales receipt, MUSIC Group
will then issue a Return Materials Authorization
(“RMA”) number.
•
connection or operation of the unit in any way
that does not comply with the technical or safety
regulations applicable in the country where the
product is used;
(3) This warranty does not detract from the seller’s
obligations in regard to any lack of conformity of the
product and any hidden defect.
§ 9 Amendment
•
damage/defects caused by acts of God/Nature
(accident, fire, flood, etc) or any other condition that
is beyond the control of MUSIC Group.
Warranty service conditions are subject to change without
notice. For the latest warranty terms and conditions
and additional information regarding MUSIC Group’s
limited warranty, please see complete details online at
behringer.com.
(7) Any repair or opening of the unit carried out by
unauthorized personnel (user included) will void the
limited warranty.
* MUSIC Group Macao Commercial Offshore Limited of
Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau,
including all MUSIC Group companies
(8) If an inspection of the product by MUSIC Group
shows that the defect in question is not covered by the
limited warranty, the inspection costs are payable by
the customer.
(2) Subsequently, the product must be returned in
its original shipping carton, together with the return
authorization number to the address indicated by
MUSIC Group.
(9) Products which do not meet the terms of this
limited warranty will be repaired exclusively at the buyer’s
expense. MUSIC Group or its authorized service center will
inform the buyer of any such circumstance. If the buyer
fails to submit a written repair order within 6 weeks after
notification, MUSIC Group will return the unit C.O.D. with
a separate invoice for freight and packing. Such costs will
also be invoiced separately when the buyer has sent in a
written repair order.
(3) Shipments without freight prepaid will not
be accepted.
§ 4 Warranty Exclusions
(1) This limited warranty does not cover consumable
parts including, but not limited to, fuses and batteries.
Where applicable, MUSIC Group warrants the valves or
meters contained in the product to be free from defects in
material and workmanship for a period of ninety (90) days
from date of purchase.
(10) MUSIC Group Authorized Resellers do not sell new
products directly in online auctions. Purchases made
through an online auction are on a“buyer beware”basis.
Online auction confirmations or sales receipts are not
accepted for warranty verification and MUSIC Group will
not repair or replace any product purchased through an
online auction.
(2) This limited warranty does not cover the product
if it has been electronically or mechanically modified
in any way. If the product needs to be modified or
adapted in order to comply with applicable technical
or safety standards on a national or local level, in any
country which is not the country for which the product
was originally developed and manufactured, this
modification/adaptation shall not be considered a defect
in materials or workmanship. This limited warranty does
not cover any such modification/adaptation, regardless
of whether it was carried out properly or not. Under the
terms of this limited warranty, MUSIC Group shall not
be held responsible for any cost resulting from such a
modification/adaptation.
§ 5 Warranty transferability
This limited warranty is extended exclusively to the
original buyer (customer of authorized reseller) and is
not transferable to anyone who may subsequently
purchase this product. No other person (reseller, etc.)
shall be entitled to give any warranty promise on behalf
of MUSIC Group.
(3) This limited warranty covers only the product
hardware. It does not cover technical assistance for
hardware or software usage and it does not cover
any software products whether or not contained in
the product. Any such software is provided“AS IS”
unless expressly provided for in any enclosed software
limited warranty.
§ 6 Claim for damage
Subject only to the operation of mandatory applicable
local laws, MUSIC Group shall have no liability to the buyer
under this warranty for any consequential or indirect
loss or damage of any kind. In no event shall the liability
of MUSIC Group under this limited warranty exceed the
invoiced value of the product.
(4) This limited warranty is invalid if the factory-
applied serial number has been altered or removed from
the product.
§ 7 Limitation of liability
This limited warranty is the complete and exclusive
warranty between you and MUSIC Group. It supersedes
all other written or oral communications related to this
product. MUSIC Group provides no other warranties for
this product.
(5) Free inspections and maintenance/repair work
are expressly excluded from this limited warranty, in
particular, if caused by improper handling of the product
by the user. This also applies to defects caused by normal
wear and tear, in particular, of faders, crossfaders,
potentiometers, keys/buttons, guitar strings, illuminants
and similar parts.
§ 8 Other warranty rights and
national law
(1) This limited warranty does not exclude or limit the
buyer’s statutory rights as a consumer in any way.
(6) Damage/defects caused by the following conditions
are not covered by this limited warranty:
(2) The limited warranty regulations mentioned herein
are applicable unless they constitute an infringement of
applicable mandatory local laws.
•
improper handling, neglect or failure to operate the
unit in compliance with the instructions given in
BEHRINGER user or service manuals;
5
GUITAR AMPLIFIER GTX60/GTX30 User Manual
1. Introduction
Ensure adequate air supply. To avoid overheating, do not place the unit near
radiators, etc.
Congratulations! By purchasing the GUITAR COMBO, you now own the newest
generation of guitar amp. It offers an extremely broad range of options and
possibilities, the only limit being your own creativity. The GUITAR COMBO is an
allrounder with so many features that you'll hardly need any other equipment.
◊
Please make sure that all devices are properly grounded/earthed.
For your own safety, never remove or disable the ground/earth
conductors from the devices or on the power cords. The unit
must always be connected to the mains outlet with a protective
grounding connection.
The demands placed on a guitar amp are nowadays very broad. A guitarist
should offer a wide array of sounds. That’s why it is very important to us to be
able to offer you maximum sound diversity as well as a variety of connection
possibilities with your GUITAR COMBO. Don’t worry, you will quickly master the
GUITAR COMBO and learn how to use all its capabilities easily and intuitively.
With its up-to-date circuitry, the GUITAR COMBO features the functionality and
reliability of a truly modern guitar amp.
1.1.1 Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
VTC Virtual Tube Circuitry
The specially developed VTC Virtual Tube Circuitry gives your sound the unique
vintage flavor of classic tube amps.
1.1 Before you get started
Your product was carefully packed at the factory to ensure safe transport.
Nevertheless, if the box is damaged inspect the unit immediately for signs
of damage.
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
◊
If the unit is damaged, please do NOT return it to us, but notify your
dealer and the shipping company immediately, otherwise claims for
damage or replacement may not be granted.
Thank you for your cooperation!
◊
◊
◊
Always use the original box to prevent damage during storage
or transport.
◊
◊
The sound quality may diminish within the range of powerful
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the unit, and use shielded cables
for all connections.
Make sure that children cannot play unsupervised with the unit or
its packaging.
We would like to draw your attention to the fact that extremely loud
sound levels may damage your hearing as well as your headphones.
Turn all VOLUME controls fully to the left before you switch on the unit.
Make sure you select a suitable volume at all times.
Please ensure proper disposal of all packaging materials.
Recycle whenever possible.
2. Control Elements
(2)
(7)
(13)
(22)
(1) (3) (4) (5) (6) (8) (9) (10) (11) (12) (14) (15) (16) (17) (18) (19) (21) (20)
Fig. 2.1: GUITAR COMBO control elements (front panel)
2.1 Front panel
(5) The TREBLE control adjusts the treble frequencies on the CLEAN
channel (GTX60 only).
(1) The INPUT socket is the 1/ connector for your guitar. Please use a standard
1/ TS connector.
(6) Press the CHANNEL button to switch between the CLEAN and OVERDRIVE
channels. The channel LED lights up when the channel is activated. You can
also switch between channels using the footswitch sold with all models.
2.1.1 CLEAN channel
(2) The CLEAN CHANNEL LED lights up when the channel is active.
(3) The VOLUME control determines the volume of the CLEAN channel.
2.1.2 OVERDRIVE channel
(7) The OVERDRIVE CHANNEL LED lights up when the channel is active.
(4) The BASS control in the EQ section boosts or cuts the bass frequencies on the
(8) The GAIN control determines the amount of gain applied and hence the
CLEAN channel (GTX60 only).
degree of distortion in the OVERDRIVE channel.
6
GUITAR AMPLIFIER GTX60/GTX30 User Manual
(9) The BASS control in the EQ section boosts or cuts the bass frequencies.
(19) Use the FOOTSWITCH jack to connect the 1/ TRS plug of the footswitch
supplied with the unit. The footswitch has three functions: to switch
between the two channels, to turn the FX on and off, and to activate and
deactivate the tuner (GTX60 only).
(10) Use the CONTOUR control for additional, highly characteristic adjustment
of the midrange, so as to easily create traditional as well as ultra-modern
guitar sounds.
(20) The POWER switch turns your GUITAR COMBO on and off. It should always be
(11) The TREBLE control adjusts the treble frequencies.
in the OFF position when connecting the unit to the mains.
◊
On the GTX60, the controls ( 9 ) , (10) and (11) are only effective on the
OVERDRIVE channel since this amplifier has a dedicated equalizer for
the CLEAN channel (see also ( 4 ) and ( 5 ) ).
◊
Please note that switching the unit off does not mean that it is fully
disconnected from the mains. To disconnect the unit from the mains
entirely, pull out the mains connector. Before installation, please make
sure that the mains connector has not been damaged. If you do not
use the unit for an extended period of time, please disconnect it from
the mains.
(12) The VOLUME control adjusts the volume level of the OVERDRIVE channel.
2.1.3 FX section
(13) The FX LED lights up when the effects processor is active.
(14) Use the FX PRESET control to select one of 16 effects.
2.1.5 Chromatic tuner
(21) The TUNER push button activates and deactivates the integrated tuner.
You can also activate and deactivate the tuner by keeping the EFFECT push
button on the footswitch pressed (GTX60 only).
Preset
1 - 4
FX
Reverb
Delay
(22) The DISPLAY shows the note played. A dot indicates that the note played is a
semitone higher (F. = F# (F sharp), G. = G# (G flat), etc.). The green LED lights
up as soon as the displayed note is in tune. Pitch variations above and below
the desired pitch are indicated by two LEDs on each side of the green LED.
The brighter these LEDs glow, the greater the deviation. The reference tone
A at 440 Hz serves as standard pitch.
5 - 8
9 - 12
13 - 16
Chorus
Flanger
Tab. 2.1: Effects
(15) The FX LEVEL control adjusts the mix ratio between the original and the
effect signal.
2.2 Rear panel
(16) The TUBE push button activates and deactivates the VTC Virtual
Tube Circuitry.
(23)
2.1.4 Connectors and POWER switch
(17) The CD IN connector allows you to connect the output signal of a CD player,
tape deck, or CD/MD walkman. For example, you can play back music CDs or
CDs accompanying a guitar tutor while practicing. This connector can also
be used as a LINE OUT output. In this case, the guitar signal has no speaker
simulation applied to it and can be routed to an external amp or mixing
console. This will not mute the built-in loudspeaker of the GUITAR COMBO.
(24)
Fig. 2.2: GUITAR COMBO control elements (rear panel)
(25) (26)(27)(28)
(23) This is the power cord.
(24) SERIAL NUMBER.
(18) The LINE OUT/PHONES jack is for headphones connection. Internal speaker
simulation is applied to the headphones signal in order to produce an
authentic signal. The built-in loudspeaker of the GUITAR COMBO is muted
when this connector is used.
(25) This is the cooling vent.
(26) The SPEAKER OUT jack (1/ TS connector) is used to connect to a
◊
The headphones output signal can also be routed to a mixing console or
other sound reinforcement system. To do so, connect the headphones
output with the line input on the mixing console. Use a standard cable
with ¼" TS connectors. If hum problems occur, you may want to insert a
DI box, such as the BEHRINGER ULTRA-DI DI100 or DI120.
loudspeaker. The minimum impedance is 8 Ohms (GTX60 only).
(27) The FX RETURN input is used to connect to the output of an external effects
unit with a shielded 1/ TS connector (GTX60 only).
(28) The FX SEND output is used to connect the input of an external effects unit
◊
At extremely high volume levels some headphones tend to produce
distortion. Please turn the volume down until the distortion is no
longer present.
with a shielded 1/ TS connector (GTX60 only).
7
GUITAR AMPLIFIER GTX60/GTX30 User Manual
3. Application Example
The GUITAR COMBO features plenty of connectors for a wealth of applications.
Here is an example of how flexible your GUITAR COMBO can be:
4. Installation
Except for the headphones output and the CD IN input (1/ TRS connectors),
all audio inputs and outputs on the BEHRINGER GUITAR COMBO are
1/ TS connectors. Please see Chapter 5, “Specifications” for more information.
◊
Please ensure that the unit is installed and operated only by people
qualified to do so. During installation and operation the user must have
sufficient electrical contact to earth. Electrostatic discharge may affect
the operation of the unit.
Footswitch
Drum Computer
BEHRINGER
HPS3000
CD Player
CD In
Fig. 4.1: 1/ TS connector
BEHRINGER
VIRTUBE GTX60
Electric Guitar
Fig. 3.1: GTX60 standard setup
For practicing in the rehearsal room or at home, please wire your GUITAR COMBO
as shown in fig. 3.1. Connect a CD player or drum machine to the CD IN input.
If you want to practice with headphones, connect your headphones to the
LINE OUT/PHONES jack. The built-in loudspeaker will be muted automatically.
Connect the dual footswitch supplied with the unit to the FOOTSWITCH jack on
the GUITAR COMBO. The CHANNEL footswitch switches between the channels.
The IN/OUT footswitch turns the effect on and off (GTX60 only).
Fig. 4.2: 1/ TRS connector
Fig. 4.3: Stereo adapter cable
Fig. 4.4: Mono adapter cable
8
GUITAR AMPLIFIER GTX60/GTX30 User Manual
5. Specifications
Audio Inputs
Power Supply
GTX60
INPUT
1/ TS, RF filtered
1/ TS
FX RETURN
Input impedance
CD IN
Power consumption
max. 90 Watts
T 1.6 A H 250 V
T 1.25 A H 250 V
T 630 mA H 250 V
approx. 1 MΩ, unbalanced
1/ TRS
Fuse 100 V~, 50/60 Hz
Fuse 120 V~, 50/60 Hz
Fuse 220-230 V~, 50/60 Hz
Input impedance
approx. 4 kΩ, unbalanced
GTX30
Audio Outputs
Power consumption
max. 45 Watts
FX SEND
1/ TS
Fuse 100 V~, 50/60 Hz
Fuse 120 V~, 50/60 Hz
Fuse 220-230 V~, 50/60 Hz
T 1.25 A H 250 V
T 1.25 A H 250 V
T 630 mA H 250 V
LINE OUT/PHONES
Output level
1/ TRS, unbalanced
max. +10 dBV
100 Ω
Output impedance
Dimensions/Weight
GTX60
Loudspeaker Outputs
Type
1/
Dimensions (H x W x D)
20.9 x 20.7 x 11/
520 x 525 x 275 mm
Min. load impedance
4 Ω
Weight
35 lbs / 15.9 kg
Amplifier
GTX60
GTX30
Peak power
GTX30
50 Watts / 8 Ω
30 Watts / 4 Ω
Dimensions (H x W x D)
18.7 x 17.5 x 9.7/
470 x 450 x 240 mm
Weight
24.4 lbs / 11.1 kg
Peak power
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
Digital Signal Processing
Converter
24-bit sigma-delta
40 kHz
Sample rate
Loudspeaker
GTX60
Type
12/
Model
BUGERA Vintage Guitar Series 12G50J8
Impedance
8 Ω
Continuous power (IEC268-5)
Peak power
50 Watts
200 Watts
GTX30
Type
12/
Model
BUGERA Vintage Guitar Series 12G30J4
Impedance
4 Ω
Continuous power (IEC268-5)
Peak power
30 Watts
120 Watts
9
GUITAR AMPLIFIER GTX60/GTX30 User Manual
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
GUITAR AMPLIFIER GTX60/GTX30
Responsible Party Name:
Address:
MUSIC Group Services US Inc.
18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone/Fax No.:
Phone: +1 425 672 0816
Fax: +1 425 673 7647
GUITAR AMPLIFIER GTX60/GTX30
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group
can void the user’s authority to use the equipment.
We Hear You
|