Wall Plate Single HDMI + 7.1 Audio
AT-80140HD
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
INTRODUCTION
Atlona Technologies’ AT-80140HD is a 7.1 Distribution Wall Plate home theater wall plate with HDMI, de-
signed for distributing High Definition Multimedia Interface (HDMI) connection with audio. This home theater
wall plate offers a variety of installation configurations. Designed for seven speakers and a subwoofer, this
Unit’s Heavy-Duty 24k Gold plated Connectors are designed to resist corrosion and to provide the best possible
connection. With a single HDMI port, HD signal can be sent with resolutions up to 1080p. This unit is perfect
for any entertainment system installation.
FEATURES
• Wall Plate type: 3 Gang
• 7speakers and 1 Subwoofer Max.
• 14 x Binding Post + 1 x RCA Jack (Coupler)
• 1 x (HDMI Female-HDMI Female)
• Max. Resolution: 1080p
• 24k Gold Plated Binding Posts.
• Binding posts to strap on the wire, banana or spade connectors can also be used.
• Binding posts support 4mm (banana) plugs.
• Binding Posts support the usage of spade connectors.
PACKAGE CONTENTS
• AT-80140HD
• Mounting Screws
• 1 x User’s Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2
INSTALLATION
You can mount this wall plate using a standard dual electrical box.
Caution: To avoid possible damage to home theater system components when connecting speaker wires to
the + and – terminals. Do not let any strands from the positive and negative wires touch each other.
1. Route the speaker wires and HDMI cable through the opening in the back of the electrical box.
2. Turn 14 screw terminal sleeves on the back of the wall plate counterclockwise to expose terminal holes.
3. For each terminal insert the corresponding positive (+) speaker wire into the terminal hole on the screw ter-
minal with the red stripe, then turn the sleeve clockwise to secure the wires.
4. For each terminal insert the corresponding negative (-) speaker wire into the terminal hole on the screw
terminal with the black stripe, then turn the sleeve clockwise to secure the wires.
5. Remove the Face plate from the wall plate, you will find four screws hidden there. Place the wall plate
against the opening of the electrical box, then thread the four supplied screws through the screw holes in the
wall plate and the electrical box, then tighten the screws and reattach the face plate.
6. You may connect your speakers or HDMI Cable to the front of the wall plate.
For Speakers use banana jacks, or you may connect them by using the binding posts. The usage of Gold Plated
banana plugs is recommended (not included).
(To use banana plugs insert the positive and negative plugs into the corresponding positive and negative jacks
on the front of the wall plate).
(To connect the speaker wire to the front using the binding posts, see steps 2-4).
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
SAFETY INFORMATION
Safeguards
To reduce the risk of electric shock, do not
Do not modify the wall plug. Doing so will
expose this product to rain or moisture
void the warranty and safety features.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly ap-
proved by the manufacturer, could void the user’s authority to operate this equipment.
Operate this product using only the included external power supply. Use of other power supplies could impair
performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device
and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed on or against
them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and
swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols.
Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also mar
the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do
so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-
80140HD. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or con-
tact Atlona directly.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4
WARRANTY
Customer Remedies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Tech-
nologies’ decision, either return of the price paid for the product, repair, or replacement of the product that
does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Cus-
tomer’s receipt. This Limited Warranty is void if failure of the product has resulted from accident, abuse, misap-
plication, or natural occurrence. In example but not limited to: power surges (electrical storms, local power out-
age), dropping the product (or items on the product), contact with fluids, and physical misconduct (i.e. kicking
or punching). Any replacement product will be warranted for the remainder of the original warranty period.
No other warranties
To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers disclaim all other
warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability
and fitness for a particular purpose, with regard to the product and any related written materials. This Limited
Warranty gives customer specific legal rights. Customers may have other rights depending on the jurisdiction.
No liability for damages
To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be
liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has
been advised of the possibility of such damages. Such damages include but are not limited to: special, inciden-
tal, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss
of business information, or any other pecuniary loss.
Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall be limited to
the amount actually paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation
of liability for consequential or incidental damage. The above limitations may not apply to you in such jurisdic-
tional cases.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few
moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll
receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration information
is completely secure. Atlona product registration is completely voluntary and failure to register will not
diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
Toll free: 1-877-536-3976
6
Local: 1-408-962-0515
|