DECLYN™
WALL-HUNG LAVATORY
VITREOUS CHINA
BARRIER FREE
DECLYN™ WALL-HUNG LAVATORY
• Wall-hung sink
• Vitreous china
• Rear overflow
• Soap depression
• Faucet ledge
Shown with 2000.101 Ceramix faucet
(not included)
❏ 0321.026 With wall hanger (Illustrated)
Faucet holes on 102mm (4") centers
❏ 0321.075 For concealed arms support
Faucet holes on 102mm (4") centers
Nominal Dimensions:
470 x 432mm
(18-1/2" x 17")
102mm
(4)
SOAP DEPRESSION
57mm
(2-1/4)
Bowl sizes:
114mm
(4-1/2)
178mm
(7)
FINISHED
WALL
362mm (14-1/4") wide
273mm (10-3/4") front to back
152mm (6") deep
432mm
(17)
C/L
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
470mm
(18-1/2)
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
483mm
(19)
406 mm
(16)
19mm
(3/4)
HANGER
267mm
(10-1/2)
89mm
38mm
(1-1/2)
(3-1/2)
76mm
(3)
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Silver
❏ Faucet*:
70mm
(2-3/4)
114mm
(4-1/2)
197mm
(7-3/4)
165mm
(6-1/2)
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
235mm
(9-1/4)
*
*
343mm
11mm (7/16) DIA.
ANCHOR SCREW
HOLES
(13-1/2)
INTEGRAL
BRACKETS
178mm
(7)
203mm
(8)
787mm (31)
864mm (34)
SUPPLIES
AS REQ'D.
❏ Concealed Arms Support (by others):
1-1/4 O.D.
WASTE
FINISHED
FLOOR
* See faucet section for additional models available
1-1/4 O.D.
TAILPIECE
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
*
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
M27
© 2008 AS America Inc.
Revised 7/07
|