American Audio Car Stereo System Q 3433 User Manual

Q-3433 MKII  
User Guide  
and Reference Manual  
4295 Charter Street  
Los Angeles Ca. 90058  
Rev. 4/05  
 
Q-3433 MKII™  
ELECTRICAL SAFETY PRECAUTIONS  
LINE VOLTAGE SELECTION  
• The desired voltage may be set with the  
VOLTAGE SELECTOR switch on the rear  
panel (using a flat head screw driver).  
• Do not force the VOLTAGE SELECTOR  
switch as this may cause damage  
WARNING: TO PREVENT FIRE OR ELECTRIC  
SHOCK HAZARD, DO NOT EXPOSE THIS  
UNIT TO RAIN, LIQUIDS, OR MOISTURE  
• If the VOLTAGE SELECTOR switch does  
not move smoothly, please contact a quali-  
fied service technician.  
CAUTION: TO PREVENT ELECTRIC SHOCK  
DO NOT USE THIS (POLARIZED) PLUG WITH  
AN EXTENSION CORD, RECEPTACLE, OR  
OTHER TYPE OF ELECTRICAL OUTLET  
UNLESS THE WIDE BLADES CAN BE  
CAREFULLY INSERTED INTO A MATCHING  
WIDE SLOT.  
MODEL NO.: Q-3433 MKII  
POWER SOURCE:  
115/230V~ 50/60Hz 20W  
MADE IN CHINA  
ATTENTION: POUR PREVENIR LES CHOCS  
ELECTRIQUES NE PAS UTILISER CETTE  
FICHE POLARISEE AVEC UN PROLON-  
GATEUR, UNE PRISE DE COURANT OU  
UNE AUTRE SORTIE DE COURANT, SAUF  
SI LES LAMES PEUVENT ETRE INSEREES A  
FOND SANS EN LAISSER AUCUNE PARTIE A  
DECOUVERT.  
T
VOLTAGE SELECTOR SWITCH  
The serial and model number for this unit is  
located on the rear panel. Please write down  
the numbers here and retain for future refer-  
ence.  
Model No._____________________________  
Serial No._____________________________  
NOTE: This product satisfies FCC  
regulations when shielded cables  
and connectors are used to con-  
nect the unit to other equipment.  
To prevent electromagnetic inter-  
ference with electrical appliances  
such as radios and televisions, use  
shielded cables and connectors  
for connections.  
Purchase Notes:  
Date of Purchase_______________________  
Dealer Name__________________________  
Dealer Address_________________________  
_____________________________________  
_____________________________________  
Dealer Phone__________________________  
 
Q-3433 MKII™  
ELECTRICAL SAFETY PRECAUTIONS  
ELECTRICAL PRECAUTIONS  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lightning flash with arrowhead symbol, within an  
equilateral triangle, is intended to alert the user to the  
presence of uninsulated "dangerous voltage" within the  
product'senclosurethatmaybeofsufficientmagnitude  
to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE THE COVER (OR BACK).  
THERE ARE NO USER SERVICEABLE PARTS  
INSIDE REFER SERVICE TO YOUR AUTHORIZED  
AMERICAN AUDIO® SERVICE TECHNICIAN.  
IMPORTANT SAFETY INSTRUCTIONS  
OBJECT AND LIQUID ENTRY - Never push objects of  
READ INSTRUCTIONS — All the safety and operating  
GROUNDING OR POLARIZATION  
instructions should be read before the product is  
operated.  
Ifthisproductisequippedwithapolarizedalternating  
current line plug (a plug having one blade wider than  
theother), itwillfitintotheoutlet onlyoneway. This  
isasafetyfeature.Ifyouareunabletoinserttheplug  
fullyintotheoutlet, tryreversingtheplug. Iftheplug  
should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
any kind into this product through openings as they  
may touch dangerous voltage points or short-out  
parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the product.  
RETAIN INSTRUCTIONS — The safety and operating  
instructionsshouldberetainedforfuturereference.  
HEED WARNINGS — All warnings on the product and  
in the operating instructions should be adhered to.  
FOLLOW INSTRUCTIONS — All operating and use  
instructions should be followed.  
SERVICING — Do not attempt to service this product  
yourself as opening or removing covers may expose  
you to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
CLEANING — The product should be cleaned only with  
a polishing cloth or a soft dry cloth. Never clean with  
furniture wax, benzine, insecticides or other volatile  
liquids since they may corrode the cabinet.  
If this product is equipped with  
a
three-wire  
DAMAGEREQUIRINGSERVICE - Unplugthisproduct  
from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
groundingtypeplug,aplughavingathird(grounding)  
pin, itwillonlyfitintoagroundingtypepoweroutlet.  
Thisisasafetyfeature.Ifyouareunabletoinsertthe  
plug into the outlet, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the grounding type plug.  
When the power-supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into  
the product.  
ATTACHMENTS  
Do not use attachments not  
recommendedbytheproductmanufacturerasthey  
may cause hazards.  
WATER AND MOISTURE — Do not use this product  
near water — for example, near a bathtub, wash  
bowl,kitchensink,orlaundrytub;inawetbasement;  
or near a swimming pool; and the like.  
ACCESSORIES — Do not place this product on an  
unstable cart, stand, tripod, bracket, or table. The  
product may fall, causing serious injury to a child or  
adult, and serious damage to the product. Use only  
If the product has been exposed to rain or water.  
Iftheproductdoesnotoperatenormallybyfollowing  
theoperatinginstructions.Adjustonlythosecontrols  
that are covered by the operating instructions as an  
improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the product to its  
normal operation.  
POWER-CORD PROTECTION - Power-supply cords  
should be routed so that they are not likely to be  
walked on or pinched by items placed upon or  
against them, paying particular attention to cords at  
plugs,conveniencereceptacles,andthepointwhere  
they exit from the product.  
OUTDOOR ANTENNA GROUNDING — If an outside  
antennaorcablesystemisconnectedtotheproduct,  
be sure the antenna or cable system is grounded so  
astoprovidesomeprotectionagainstvoltagesurges  
andbuilt-upstaticcharges.Article810oftheNational  
ElectricalCode,ANSI/NFPA70,providesinformation  
with regard to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire  
to an antenna discharge unit, size of grounding  
conductors, location of antenna-discharge unit,  
connection to grounding electrodes, and  
requirementsforthegroundingelectrode.SeeFigure  
A.  
LIGHTNING — For added protection for this product  
duringalightningstorm,orwhenitisleftunattended  
and unused for long periods of time, unplug it from  
the wall outlet and disconnect the antenna or cable  
system. This will prevent damage to the product