Datasheet | Switches
AT-8000S/48
Layer 2 Stackable Fast Ethernet Switch
AT-8000S/48
Secure Management
Key Features
48 port stackable 10/100TX Layer 2 switch
with 2 active SFP bays (unpopulated) and
2 standby 10/100/1000T ports (RJ-45)
Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.
Easy,Well Known Management
• Industry standard CLI
• Simple intuitive, full featured AlliedTelesis
Web Interface
Overview
One of a series of stackable switches from
AlliedTelesis, the AT-8000S/48 provides high
performance Layer 2 switching in an affordable
fixed configuration platform.This switch offers
48 10/100 ports, two fixed 1Gbps SFP slots
plus two integrated stacking connectors that
deliver a total of 4Gbps stacking bandwidth.The
stacking capability integrated into this platform
is configured as a resilient ring topology
designed to provide high reliability and
simplified management for higher port density
applications.
• Secure encrypted Web and CLI management
with SSHv2 and SSL
• SNMP
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as IEEE 802.1x port-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a
pre-determined part of your network offering
guests such benefits as Internet access while
ensuring the integrity of your private network
data.
• Two level access privileges
Affordable Truly Stackable 10/100
Switching Platform
• Single IP address stack management
• 4Gig resilient ring stacking architecture
• Across stack link aggregation
• Across stackVLAN configuration
• Across stack port mirroring
• Redundant standby stack master
Gigabit and Fast Ethernet SFP
Support
Ideal Branch Office and Wiring
Closet Connectivity
All the QoS Needed in the Wiring Closet
for Today’sVoice and Data Networking
• Eight priorities assigned to four queues
• IEEE 802.1p for Layer 2 QoS
• DSCP (DiffServ) for Layer 3 QoS
• IEEE 802.1p to DSCP remarking traffic ready for
transport to the Layer 3 core of the network
• Layer 2 and Layer 3 ACL
All switches in the 8000S family support both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs).This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased in over time.The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Support for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.
Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices. The state-of-the-
art QoS capability of this product ensures
reliable delivery of advanced network services
such as voice while effectively controlling the
continually increasing traffic needs found in
today’s networks.
Easy Access Networking
Securing the Network at its Most
Vulnerable Point
• IEEE 802.1x and RADIUS network login: for
advanced control of user authentication and
accountability
• GuestVLAN: to ensure visitors or unauthorized
users connect only to services defined by IT e.g.
Internet
Featuring an industry standard CLI and Allied
Telesis’ intuitive yet fully featured Web interface
the advanced features of the AT-8000S/48 are
accessible to a wide range of system
administrators. The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.
• TACACS+: for ease of management security
administration
• Layer 2 and Layer 3 ACL
• Port MAC address security options
%
+
Power Supply Efficiency
Allied Telesis
Layer 2 Stackable Fast Ethernet Switch
AT-8000S/48 |
Security
Environmental Specifications
Operating temp 0°C to 40°C (32°F to 104°F)
Storage temp -25°C to 70°C (-13°F to 158°F)
Relative humidity 10% to 90% non-condensing
Storage humidity 5% to 95% non-condensing
Operating altitude Maximum 3,000m (9,843ft)
Ordering Information
Management security: username and password protection
SSHv2 for Telnet management
SSLv3 for Web management
RFC 1492
AT-8000S/48-xx
48 port stackable 10/100TX Layer 2 switch with
2 active SFP bays (unpopulated) and 2 standby
10/100/1000T ports (RJ-45)
TACACS+
RFC 2138
RADIUS Authentication
Port-based network access control
Dynamic VLAN1
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
IEEE 802.1x
Where xx = 10 for US power cord
20 for no power cord
RADIUS accounting1
Multi-session mode1
Action on violation1
Single-host violation1
Guest VLAN timeout1
Authentication not-required1
Electrical/ Mechanical Approvals
30 for UK power cord
40 for Australian power cord
50 for European power cord
Safety
EMI
UL 1950 (UL/cUL), EN60950 (TUV)
FCC Class A, EN55022 Class A,
VCCI Class A, C-Tick, EN61000-3-2,
EN61000-3-3
Immunity
EN55024
Accessories
Small Form Pluggables (SFPs)
Security login banner1
Guest VLANs
RoHS compliant
RFC 2865
IEEE 802.1x port-based network
access control
AT-SPFX/2
Multi-mode fiber, 2km, 100FX, SFP, 1310nm
Package Description
One AT-8000S/48 switch
Power cord AC
MAC-based network access control
ACL - Access Control Lists
AT-SPFX/15
Single-mode fiber, 15km, 100FX, SFP, 1310nm
Rack-mount kit
Fault Protection
Broadcast storm control
Rubber feet for desktop installation
RS232 management cable
Stacking cable
AT-SPFX/40
Single-mode fiber, 40km, 100FX, SFP, 1310nm
Power Characteristics
Install guide and user guide in CD and at
AT-SPTX
Copper, GbE Small Form-factor Pluggable (SFP)
Voltage input
100- 240V AC
Voltage output
Current
12vDC
AT-SPSX
1.5A
Country of Origin
China
Multi-mode fiber, GbE Small Form-factor Pluggable (SFP)
850nm
Power consumption
Power supply efficiency
Heat dissipation
Clock Frequency
Acoustic noise
32.6W2
79.88%
184.41 BTU/hour
166MHz
41dB
AT-SPLX10
Single-mode fiber, 10km, GbE SFP, 1310nm
AT-SPLX40
Single-mode fiber, 40km, GbE SFP, 1310nm
AT-SPLX40/1550
Single-mode fiber, 40km, GbE SFP, 1550nm
AT-SPZX80
Single-mode fiber, 80km, GbE SFP, 1550nm
AT-SPBD10-13
Single-mode fiber, 10km, GbE SFP, 1310/1490nm,
LC-BiDi
AT-SPBD10-14
Single-mode fiber, 10km, GbE SFP, 1490/1310nm,
LC-BiDi
1
New feature on AT-S94 version 3.0.0.32
2 Worst case load condition for actual measured power on sample unit
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters |Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
© 2011 AlliedTelesis Inc.All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-000176 Rev. P
|