Allied Telesis Network Card AT A35 SX SC User Manual

Datasheet | Expansion Modules  
Rapier Series Uplink Modules  
Gigabit & Fast Ethernet  
AT-A35/SX  
1 x Gigabit fiber uplink SC connector  
Model Compatibility  
Rapier Rapier i Rapier G Rapier GF 8700XL  
Key Features  
AT-A35/SX Yes  
AT-A35/LX Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Gigabit fiber  
AT-A35/LX  
1 x long haul Gigabit fiber uplink SC  
connector  
1
AT-A39/T  
Yes  
Gigabit fiber long haul  
Auto-negotiating Gigabit copper  
AT-A40/SC No  
AT-A40/MT No  
AT-A41/SC No  
AT-A41/MT No  
AT-A42/GBIC Yes  
AT-A39/T  
1 x auto-negotiating Gigabit copper uplink  
RJ-45 connector  
Fast Ethernet fiber (singlemode fiber  
& muti-mode fiber)  
AT-A40/SC  
Fast Ethernet multimode fiber uplink, SC  
connector  
1. Does not offer auto-negotiation, operates at 1000T only.  
Flexible, hot-swappable GBIC  
Regulatory Standards  
AT-A35/SX, AT-A35/LX & AT-A39T  
Interoperable with Rapier i, Rapier G6,  
Rapier G6F & 8700XL switches  
AT-A40/MT  
Fast Ethernet multimode fiber uplink, MT  
connector  
EMC  
EN55022 class A, FCC class A, and  
VCCI class A  
LED status indicators  
Compact size  
Immunity  
Safety  
EN55024  
Listing - UL, cUL, TUV  
Standards - UL 60950, CAN/CSA-C22.2  
NO. 60950-00, EN60950  
AT-A41/SC  
Fast Ethernet singlemode fiber uplink, SC  
connector  
AT-A40/SC, AT-A40/MT, AT-A41/SC, AT-A41/MT & AT-A42/GBIC  
AT-A41/MT  
Gigabit Interface Converter  
(GBIC) Modules  
EMC  
EN55022 class A, FCC class A, and  
VCCI class A  
Fast Ethernet singlemode fiber, MT connector  
Immunity  
Safety  
EN55024  
AT-A42/GBIC  
Uplink module with 1 GBIC bay  
AT-G8SX  
500m SX GBIC, based on 50 Micron fiber  
220m SX GBIC, based on 62.5 Micron fiber  
Listing - UL, cUL, TUV  
Standards - UL 60950, CAN/CSA-C22.2  
NO. 60950-00, EN60950  
Uplink Flexibility  
AT-G8LX10  
10km LX GBIC, based on 9 Micron fiber  
Uplink modules provide a flexible range of  
interface options, including Gigabit copper, Fast  
Ethernet fiber, and Gigabit fiber. This flexibility  
allows Rapier L3 switches to span a wide variety  
of network topologies and physical media.  
Uplink modules can be changed or replaced to  
meet changing network requirements, reducing  
backup inventory costs.  
Environmental Specifications  
Operating Temp. 0°C to 40°C (32°F to 104°F)  
Storage Temp.  
-25°C to 70°C (-13°F to 158°F)  
AT-G8LX25  
25km LX GBIC, based on 9 Micron fiber  
Relative Humidity 5 to 95% non-condensing  
AT-G8LX40  
40km LX GBIC, based on 9 Micron fiber  
AT-G8LX70  
70km LX GBIC, based on 9 Micron fiber  
Allied Telesis  
 

3Com Network Card 3C900B User Manual
Accusplit Fitness Electronics AE180XL User Manual
Acnodes Heat Pump Q5RF SERIES User Manual
Aiphone Intercom System GT 1D User Manual
Aiphone Intercom System IP EWST User Manual
AllTrade Food Warmer BAR916HG User Manual
American Standard Outdoor Shower 1660200 User Manual
Atlona Switch AT HDMI 22M User Manual
Audiovox Remote Starter XR6900 User Manual
Baracoda Barcode Reader BCM 2604 User Manual