user’s guide
CVS-11T Complete Home Turbine Package
sAVe THese iNsTruCTiONs
CVS-11T Complete Home Package
Individual tools may vary and
are subject to change at any time.
8.
1.
4.
3.
9.
5.
7.
6.
2.
PaCkaGe inCludeS:
1. 99473 — 30ft. Low Volt Soft Grip 3200 Series Hose w/Friction Stub Tube
2. 34498 — Chrome Ratchet Wand
3. 35202 — Plastic Hose Hanger
4. 34905 — 12” Natural Bristle Hard Floor Brush.
5. 34828 — Dusting Brush
6. 34806 — Crevice Tool
7. 35290 — Upholstery Tool / 35312 — Slide-On
8. 35257 — Single Speed Baby Turbo
9. 34751 — Wand Clip-On Tool Caddy
3
35257 TurbiNe
This turbine, with chevron agitator, is ideal for homes with high quality area rugs laid
directly over hard floors where electric brushes can be too aggressive. This turbine must
be used with the ratchet wand.
FeaTuReS inClude:
Soft non-marring wheels on the
cleaning shoe allow the tool to
traverse a carpet’s transition
area, between the carpet and a
hard surface, comfortably.
The only air-turbine with a clean-
ing shoe that keeps the brush
parallel to the floor throughout
the sweeping motion means bet-
ter results.
A built-in air relief valve
allows the tool to be adjusted
to better match the vacuum
and floor conditions.
1.25” (32mm) double swivel
neck for maximum maneuver-
ability while vacuuming.
Chevron brush pattern imporves cleaning ability by drawing the dirt
to the center of the brush where it is drawn away. A positive timing
belt drive provides reliable performance.
4
sAVe THese iNsTruCTiONs
This light turbine design has a 10 inch
cleaning path for getting in and around
furnishings with ease.
REMEMBER: As with all electric appliances, risk of shock is possible. Do not remove
brush, pull wands out, or attempt maintenance while power is on.
wANds
Wand fits easily into the neck
of the turbine for an easy lock
and release.
Nylon collar on the friction wand provides a positive fit to the hose
handle and a clean finish, eliminating sharp edges.
OPERATION: Your turbine powerhead has no on/off switch. Whenever it is attached
to an operating vacuum system, it will be running. No adjustments to the tool are neces-
sary for different types of carpeting.
To insure maximum efficiency of the turbine powerhead, make sure that
any filters, bags and cleaning hoses in your vacuum system are clean and
free of blockage.
5
35257 TurbiNe iNsTruCTiONs
inSTallaTion:
1. Read important safety instructions before installing the turbine nozzle.
2. Ensure your central vacuum is not running before installing the turbine nozzle.
3. Connect the telescopic wand to the turbine nozzle.
SToRaGe:
1. Ensure vacuum cleaner is disconnected before unplugging turbine nozzle.
2. Disconnect wand from hose.
3. Remove turbine nozzle from the telescopic wand store turbine in a safe place.
CHanGinG belT:
1. Insure power has been switched off at the central vacuum unit.
2. Remove turbine nozzle from the telescopic wand.
3. Remove screws from bottom of turbine.
4. Remove base plate from turbine.
5. Replace brush roll.
6. Replace old belt with new belt.
7. Insert brush roll back into correct spot.
8. Replace base plate and put screw back in.
CHanGinG bRuSH Roll:
1. Insure power has been switched off at the central vacuum unit.
2. Remove turbine nozzle from the telescopic wand.
3. Remove screws from bottom of turbine nozzle.
4. Remove base plate from turbine nozzle.
5. Replace old brush roll with new brush roll.
6. Insert brush roll back into correct spot.
7. Replace base plate and put screw back in.
rATCHeT wANd iNsTruCTiONs
The wand length is adjustable and requires no assembly.
To adjust, simply push down on the wand and adjust
button and slide to the desired height.
6
sAVe THese iNsTruCTiONs
35257 exPlOsiON
1
2
5
3
4
12
10
7
8
9
6
11
diaGRaM#
SToCk#
37666
37699
37589
37611
37809
44266
37622
37798
37633
37644
37655
37677
deSCRiPTion
COVER
TURBINE FOR SINGLE SPEED
BEARING
BELT
NECK
SCREW
BASE
1
2
3
4
5
6
7
8
9
AFR
PIVOT FOOT
BRUSH ROLL
WHEELS ONLY
SmALL SUCTION OPENING
10
11
12
For proper handling of your order please indicate stock number and descriptions.
7
lOw VOlTAge CrusH-PrOOF HOse
The “slimfit” style handle has 360° rotation to minimize kinks, effort, and in-hand weight.
For use with the turbine nozzle.
HoSe HandlinG:
Hold the hose and handle in any way you find to be the
most comfortable. With this new style handle, numerous
hand positions are offered and reduce strain and
increase ease of use.
Also, for added ease while vacuuming, try keeping the hose behind you rather than out
in front of you. Use one hand to hold the handle and the other hand to hold and guide the
hose. Again, do what feels comfortable to you.
TWo PoSiTion SWiTCH:
Allows vacuum to be controlled from the handle
• Vacuum off
• Vacuum on
iMPoRTanT:
make sure power is turned oFF before removing the hose and handle from the wand.
Arcing or damage to the electrical contacts can occur if the wand is removed while brush
power is on.
Hose end:
This universal style wall end is designed for compatibility with
all North American valves and inlests and fits the majority of
European inlets as well. The positive locator system prevents
rotationn of the wall end in the valve defeating the total control
switch in the handle.
8
sAVe THese iNsTruCTiONs
CleANiNg ATTACHMeNTs ANd TOOls
PlaSTiC HoSe HanGeR:
• Use of hanger can increase the life of your hose and save
space while storing.
• Coil your hose around this hanger to store when not in use.
• mount on a wall in a closet, garage, or any other convenient
location for hose storage, and place it high enough so you can
loop your hose only four times and still clear the floor.
• mounts using only one stud and two screws.
12” FlooR bRuSH:
• Works well to clean bare floors, wood flooring, tile, etc.
• Shorter bristles in front, longer in back, allows larger
dirt particles to be picked up with forward movement.
For best results, do not force the front of the brush down when moving forward. allow
the brush to gently glide across the floor. The front of the brush should allow particles to
enter through the raised bristles.
CReViCe Tool:
• Tool reaches into cracks and crevices such as tracks of slid-
ing glass doors, corners, along baseboards, and even in the
cracks of couches and other furniture.
• Notched end helps maintain air flow and proper suction.
• This tool has flat sides which makes it great for reaching un-
der refrigerators, around air conditioner coils, and other hard
to reach places that collect a lot of dust and dirt.
duSTinG bRuSH:
• Use for dusting furnishings such as bookcases,
tables, desks, and mantles.
• Also great for dusting picture frames, collectibles,
tops of televisions, window sills, and even the
backs of computer monitors.
• Full, natural bristles for gentle cleaning.
9
CleANiNg ATTACHMeNTs ANd TOOls
uPHolSTeRY Tool WiTH Slide-on bRuSH:
• Cleans upholstered furniture, drapes, mattresses,
and even works well on vehicle upholstery and carpets.
• The directional slide brush assures consistent fit and
is detachable for aggressive cleaning.
TeleSCoPiC Wand:
• Attach any of your standard suction tools such as the upholstery tool or dusting brush
for whatever cleaning needs you may have.
Tool CaddY:
• Adds portable convenience by allowing multiple tools to be
carried on the wand for quicker and easier access.
• To attach: Snap caddy onto wand at an angle (beveled side
first), then slip attachments and tools onto caddy pegs. when
clipping it onto wand, attach it so that the two-peg side faces
up, while the single-peg side faces down the wand. This will
keep your tools on better.
Accessories shown may not be to scale.
10
sAVe THese iNsTruCTiONs
For more details on these or any other AirKing products, contact your local Airking dealer or visit our web-
sites at www.airkinglimited.com
Caring for your carpet.
“Proper maintenance will extend the time you can enjoy your carpet and help keep its fresh appearance.
Vacuum regularly, remove spills promptly, and extraction clean periodically. Use a strong, well function-
ing vacuum cleaner with a powerful airflow, adjustable brushes, and an enclosed, high efficiency filtration
bag. It is best to purchase a vacuum cleaner that bears the CRi indoor air Quality Testing Program
label, assuring that the cleaner will remove soil well, contain the dust within the machine, and protect the
carpet’s appearance.”
—The Carpet & Rug Institute (CRI)
Air KiNg AMeriCA liMiTed wArrANTY:
WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for
one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product,
whichever first occurs.
WHAT AIR KING WILL DO: During the warranty period, Air King will, at its sole option, repair or replace any part or parts
that prove to be defective or replace the whole product with the same or comparable model.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed
because of accident, improper handling or operation, shipping damage, abuse, misuse, unauthorized repairs made or
attempted. This warranty does not cover shipping costs for the return of products to Air King for repair or replacement. Air
King will pay return shipping charges from Air King following warranty repairs or replacement ANY AND ALL WARRAN-
TIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANT-
ABILITY), LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF
THE PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL
AIR KING’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSE-
QUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACMENT OR REPAIR OF ANY HOUSE
FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO
EVENT SHALL AIR KING’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE
PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WAR-
RANTY PERIOD.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of
incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you spe-
cific legal rights. You may also have other rights which vary from state to state and province to province. Proof of purchase
is required before a warranty claim will be accepted.
CusTOMer serViCe:
Toll-Free (800) 465-7300
Our Customer Service team is available to assist you with product questions, service center locations, and replacement
parts. They can be reached monday through Friday, 8am-4pm Eastern. Please have your model number available, as well
as the type and style (located on the label inside of your product). Please do not return product to place of purchase.
PARTS FOR DISCONTINUED, OBSOLETE AND CERTAIN OTHER PRODUCTS
MAY NOT BE AVAILABLE. DUE TO SAFETY REASONS, MANY ELECTRONIC COMPONENTS AND MOST HEATER
COMPONENTS ARE NOT AVAILABLE TO CONSUMERS FOR
INSTALLATION OR REPLACEMENT.
11
CONTACT
location information
Corporate Headquarters for
united States division:
820 lincoln avenue
West Chester, Pa 19380
Ph. 800.465.7300
#F51064
|