Special
Order
Products
Updated 07/2002
MY-CU-PH/B
Video Monitor
MK Video Door Answering with Panasonic® Phone System
- INSTRUCTIONS -
This monitor allows one or two MK video door stations to be used for video door answering, where the
communication is through a Panasonic® telephone system and the video appears on the Aiphone
monitor(s). The MY-CU-PH/B integrates MK PanTilt door stations with Panasonic's KX-T series
systems. (Works with KX-TA Advanced Hybrid series and KX-TD Digital Super Hybrid series.)
WIRING DIAGRAM:
VIDEO OUTPUT TO CABLE
DISTRIBUTION OR CCTV MONITOR:
Use Aiphone MYW-MD/B Demodulator,
wired with 4 conductor, 18 AWG wire from
the MY-CU-PH/B monitor or last MYH-CU
in the system. Output is a standard 1V
peak-to-peak video signal.
MK-DBC*
MY-CU-PH/B
A1
A2
1A1
1A2
MK-DBC*
A1
A2
2A1
2A2
MYH-CU
MYH-CU
MYW-MD/B
B1
B2
A1
A2
+
-
U1
U2
DA1
DA2
B1
B2
A1
A2
B1
B2
+
-
U1
U2
*VIDEO DOOR STATIONS:
Any Aiphone MK or MY Series video door
station can be used:
-MK-DAC: Surface mount, black
-MK-DBC: Semi-flush mount, black
-MK-DGC: Semi-flush mount, metal cover
-MK-DGV: Semi-flush mount, vandal
proof, stainless steel cover
Move jumper to
bottom 2 pins
PS-1820UL
PS-1820UL
+
-
+
-
DV+
DV-
+
-
U1
U2
+
-
DV+ to core of Coax
DV- to shield of coax
-MK-DS/B: Surface mount, fixed camera,
Black
Raw video output
(Analog wiring shown)
PHONE JACK TERMINAL BLOCK WIRING
With KX-TA62460 Doorphone card (Analog):
D1
E
D2
1
3
2
4
D1 = 1 (Green)
D2 = 3 (Black)
E
E
= 2 (Red)
= 4 (Yellow)
MY-CU-PH/B TERMINAL DEFINITIONS:
1A1
1A2
2-Wire connection
for Door Station #1
With KX-TD160 Doorphone card (Digital):
D1 = 2 (Red)
D2 = 4 (Yellow)
E
E
= 1 (Green)
= 3 (Black)
Modular cord
from terminal
block to Door
Adaptor in
2A1
2A2
2-Wire connection
for Door Station #2
With KX-TD161 Doorphone card (Digital):
Panasonic KSU
D1 = 1 (Green)
D2 = 4 (Yellow)
E
E
= 2 (Red)
= 3 (Black)
B1
B2
Video out to
sub monitors
SPECIFICATIONS:
Power Source:
18V DC.
Use one PS-1820UL for every three monitors.
MY-CU-PH/B Standby: 0.12A; Max. 0.9A
MYH-CU Standby: 0A; Max .4A
Through Panasonic® Telephone system
Hands free at door station
Monitors activate and Panasonic phones ring
4" direct view flat CRT
525 lines
U1
U2
Control wires
Control wires
Consumption:
Communication:
+
-
Positive 18V DC
Negative
Calling:
Video Monitor:
Scanning lines:
To Panasonic Phone System:
D1
D2
E
Door 1 call-in & audio
Door 2 call-in & audio
Common audio
Dimensions (HxWxD): 8-14"" x 6" x 2"
Weight: MY-CU-PH/B: 2.2 lbs.
MYH-CU: 1.98 lbs
Pg. 1
|