Acoustic Energy Home Theater System A Ego 5 User Manual

English  
Technical Information  
Power ratings:  
Satellite Speakers:  
120V Model - 120V @ 60Hz; 80VA  
240V Model - 140V @ 50Hz; 80VA  
A patented advanced technology driver featuring a unique heat  
transfer system: special high excursion suspension and a  
computer-designed anti-resonant cone  
Dimensions:  
Sub Woofer - 265mm x 190mm x 350mm  
Satellites - 68mm x 103mm x 90mm  
Inputs:  
3 x RCA Phono - Line level  
1 x Stereo Mini jack - Line level  
Weight:  
9 Kg  
Outputs:  
3 x Speaker terminals  
Finishes:  
Black sub woofer  
Controls:  
Textured black satellites with  
silver/grey grilles  
1 x Volume / Power pot  
1 x Bass switch (3 Position)  
1 x Centre input switch (2 Position)  
White sub woofer  
Textured white satellites with  
silver/grey grilles  
Accessories:  
2 x 5 metre Speaker cables  
1 x 2 metre Signal input cable  
1 x Speaker level to line level  
adaptor cable  
2 x Wall brackets  
Warranty  
Your Acoustic Energy loudspeakers are guaranteed against original defects in materials,  
manufacture and workmanship for 1 year from the date of purchase.  
Please retain all original packaging materials for possible future use.  
Under this warranty Acoustic Energy agrees to repair any defect or, at the company’s discretion,  
replace the faulty component(s) without charge for parts and labour.  
This warranty does not imply any acceptance by Acoustic Energy or its agents for consequential  
loss damage and specifically excludes fair wear and tear, accident misuse or unauthorised  
modification.  
OWNERS  
MANUAL  
This warranty is applicable in the United Kingdom only and does not in any way limit the  
customer’s legal rights. Claims and enquiries under the warranty for AE products purchased  
outside the UK should be addressed to the local importers or distributors.  
If you have reason to claim under the warranty please contact your dealer in the  
first instance.  
Designed by KOI Inc (USA) Exclusively for Acoustic Energy Limited (UK)  
Manufactured in Malasyia.  
Acoustic Energy Limited, 16 Bridge Road, Cirencester, Gloucestershire GL7 1NJ. UK  
Tel: +44 (0)1285 654432 Fax: +44 (0)1285 654430  
 
3
Connecting Aego5  
AEGO5 Speaker Placement  
As with all loudspeakers, the placement in  
Controls  
POWER  
Subwoofer  
relationship to room boundaries (walls etc.) will have  
a major effect on their overall performance. As the  
Aego Satellites are so small your choice of positions  
is far greater and you should use this to maximize  
the performance of these remarkable little speakers.  
Front Left  
Front Right  
Existing Decoder  
Centre  
Front Front Rear  
Left Right Left  
Rear  
Right  
Sub Centre  
If a speaker is positioned in free air (not close to any  
walls etc.) then it will sound brighter. If mounted on  
or close to a large object (such as a table or on a  
wall) then the mid range will become louder and the  
speaker will sound warmer and more powerful.  
When set to AUTO”  
the Aego system will  
go in to standby mode  
if no signal is detected  
for a period of time  
(10 minutes).  
see page 5 for connection  
in to AEGOP5 decoder.  
It will automatically  
switch back on when  
a signal is detected.  
In most situations we would recommend that the  
satellites are mounted on walls at about head height  
with the brackets provided to give you a warm  
powerful sound that you will find pleasing and  
comfortable. However if this is not possible then  
Aego Speaker Stands are available from your dealer.  
SUB  
LEVEL  
(Alternative)  
Rear Left  
(Alternative)  
Rear Right  
Sub Level  
This can be altered to  
obtain preferred level  
of bass.  
Right Speaker  
Centre Speaker  
Left Speaker  
Surface Mounting  
Stand Mounting Wall Mounting  
AUX.  
SUB.  
Sub output  
This output is available  
to supply an auxiliary  
subwoofer such as the  
Acoustic Energy  
Aegis Compact Sub.  
This may be  
SPEAKER OUTPUTS  
FRONT  
RIGHT  
FRONT CENTRE  
LEFT  
REAR  
RIGHT  
REAR  
LEFT  
AUX.  
SUB.  
SUB  
LEVEL  
MULTIPIN  
INPUT  
POWER  
recommended when  
used in a large room.  
*
*
Power  
Not supplied  
Volume knob  
*
This is the main volume  
control for all channels.  
When used with a  
decoder it would  
normally be set to  
maximum, This enables  
the Aego5 system to be  
used with DVD players  
that have a built in  
decoder but no overall  
volume control.  
Surround Right (SR)  
Subwoofer  
Surround Left (SL)  
Detachable grille  
can rotate to suit  
speaker orientation.  
4
5
 
Connecting AEGOp5  
(with 5.1 Theatre System)  
Games Consul  
VCR  
Audio Out  
L
CD Player  
Laserdisc  
DVD Player  
Digital Audio Out  
L
Audio Out  
Optical  
Controls  
POWER  
L
L
Coaxial  
R
R
R
R
Phono Jack  
Play  
Rec  
When set to AUTO”  
the Aego system will  
go in to standby mode  
if no signal is detected  
for a period of time  
(10 minutes).  
Front  
Left  
Rear  
Left  
Centre  
It will automatically  
switch back on when  
a signal is detected.  
ACOUSTIC ENERGY LIMITED,  
16 BRIDGE ROAD, CIRENCESTER,  
GLOUCESTERSHIRE GL7 1NJ  
Left  
WWW.ACOUSTIC-ENERGY.CO.UK  
Right  
SUB  
LEVEL  
Front  
Right  
Rear  
Right  
Sub  
AUX 2  
AUX 1  
LINE IN  
OPTICAL  
IN  
DIGITAL  
IN  
POWER  
12V DC  
MULTIPIN  
Developed And Manufactured By Videologic Systems.  
AEGOP5 Decoder  
Centre Speaker  
Right Speaker  
Left Speaker  
Sub Level  
This can be altered to  
obtain preferred level  
of bass.  
AUX.  
SUB.  
SPEAKER OUTPUTS  
Sub output  
FRONT  
RIGHT  
FRONT CENTRE  
LEFT  
REAR  
RIGHT  
REAR  
LEFT  
AUX.  
SUB.  
This output is available  
to supply an auxiliary  
subwoofer such as the  
Acoustic Energy  
Aegis Compact Sub.  
This may be  
SUB  
LEVEL  
MULTIPIN  
INPUT  
POWER  
Power  
recommended when  
used in a large room.  
Acknowledgments & Trademarks  
FCC Compliance Statement  
The equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
All contents are subject to change at any time without  
notice. No responsibility is assumed for its use; or for  
infringements of patents or other rights of third parties  
and no patent or license is implied hereby.  
All trademarks are the property of their respective  
owners. Manufactured under license from Dolby  
Laboratories. Dolby, Pro Logic and the double-D  
symbol are trademarks of Dolby Laboratories.  
Confidential Unpublished Works. (c)1992 - 1997  
Dolby Laboratories, Inc. All rights reserved.  
Volume knob  
This is the main volume  
control for all channels.  
When used with a  
decoder it would  
Surround Right (SR)  
Subwoofer  
Surround Left (SL)  
I Reorient or relocate the receiving antenna.  
normally be set to  
I Increase the separation between the equipment and receiver.  
I Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
maximum, This enables  
the Aego5 system to be  
used with DVD players  
that have a built in  
decoder but no overall  
volume control.  
1. After properly connecting AEGOP5 to your audio sources and amplifier, plug in AEGOP5 s AC adapter to an AC outlet.  
2. Turn on the power of AEGOP5 by pushing the POWER button on the front panel. Turn on the power of all audio  
sources, amplifier, or powered subwoofer.  
Manufactured under license from Digital Theater  
Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380,  
5,978,762 and other worldwide patents issued and  
pending. DTSand DTS Digital Surroundare  
registered trademarks of Digital Theater Systems, Inc.  
Copyright 1996, 2000 Digital Theater Systems, Inc.  
All Rights Reserved.  
I Consult the dealer or an experienced radio/TV technician for help.  
Notice  
This device complies with Part 15 of the FCC rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation. Shielded cables and I/O cords must be used for this equipment to comply with  
the relevant FCC regulations.  
3. Installation is now complete, get ready to experience true Dolby Digital or DTS surround sound.  
Note: To prevent damage to speakers, when playing music or a movie, ensure the volume is set low initially.  
Gradually turn the volume up to an appropriate level after the playback has started.  
6
7
 
AEGOp5 Decoder  
AEGOp5 Remote Control  
1
2
3
4
5
6
POWER Button  
On/off key  
INPUT MODE Button  
Select from the 5 different source inputs  
Front  
Left  
Rear  
Left  
9 6  
AEGOP5  
TEST Button  
Test signal for the 6 discrete channels  
Centre  
Sub  
Front  
Right  
Rear  
Right  
MUTE Button  
Mute the sound (toggle on and off)  
input  
power  
2
4
1
PRO LOGIC Button  
Select from 4 different surround settings  
mute  
test  
3
balance  
delay  
prologic  
DELAY Button  
Select the desired channel to engage the time  
delay adjustment  
AEGOp5 Front Panel  
7
5
field  
EQ on/off EQ setup  
1. The POWER Button  
2. LCD Display  
3. Speaker Channel LEDs  
8
10  
Turns AEGOP5 on or off.  
Provides you with  
information regarding the  
system status and settings.  
Each LED represents the status of an individual channel. When  
a particular channel is active, the LED lights up.  
The colour of the LED also indicates the frequency range of  
that channel:  
7
8
9
BALANCE Button  
preset 1 preset 2 preset 3  
Set the volume setting for each of the 6 channels  
11  
13  
14  
EQ SETUP Button  
Select up to 5 EQ Band Settings  
save1  
preset 4  
load  
Cen  
12  
15  
* Red means this particular channel has been set to output a wider frequency  
range that contains bass signal between 20Hz to 120Hz.  
* Green means this particular channel doesnt contain the bass signal between  
20Hz to 120Hz.  
EQ ON/OFF Button  
Activate the selected EQ Band Setting  
BassManager  
SL/SR  
SW  
10 FIELD Button  
Select from 6 different sound fields  
VOL  
D Time  
DRC  
reset  
11 PRESET Button (P1, P2, P3, P4)  
18  
19  
Recall up to 4 different presets  
12 SAVE Button  
17  
16  
Store your settings into a selected preset  
Front  
Left  
Rear  
Left  
Centre  
13 LOAD Button  
ACOUSTIC ENERGY LIMITED,  
16 BRIDGE ROAD, CIRENCESTER,  
GLOUCESTERSHIRE GL7 1NJ  
Left  
Activate your saved setting stored in selected preset  
WWW.ACOUSTIC-ENERGY.CO.UK  
14 SPEAKER ON/OFF Buttons (CEN, SL/SR, SW)  
CEN Button activates/deactivates the centre  
channel speaker.  
Right  
Front  
Right  
Rear  
Right  
Sub  
AUX 2  
AUX 1  
LINE IN  
OPTICAL  
IN  
DIGITAL  
IN  
POWER  
12V DC  
MULTIPIN  
Developed And Manufactured By Videologic Systems.  
LS/RS Button simultaneously activates/deactivates  
the left and right rear speakers.  
SW Button activates/deactivates the subwoofer.  
AEGOp5 Rear Panel  
15 BASS MANAGER Button  
1. MULTIPIN Audio Output:  
Switches between three bass configurations  
(bass config.1, bass config.2 and bass config.3)  
This output feeds 6 channels audio signals to the matching input on a control centre or power amplifier via a multipin (DIN) cable.  
16 VOL + and VOL -  
2. Main Outputs (Front Left, Front Right, Rear Left, Rear Right, Centre and Sub):  
Increase/decrease the volume.  
The Six outputs feed audio signals to the matching inputs on a control centre or power amplifier.  
17 D TIME Button  
3. AUX1 AUX2 and LINE Inputs:  
Increase/decrease the delay time.  
These inputs accept signals from stereo analog signal sources.  
18 DRC Button  
Select among 3 different dynamic range  
compression ratios.  
4. OPTICAL and DIGITAL inputs:  
Your AEGOP5 has two types of digital inputs. One S/PDIF (OPTICAL) and one coaxial (DIGITAL) input. Connect the digital outputs of the  
sound sources to these inputs.  
19 RESET Button  
Resets the system to its factory default settings.  
5. 12V DC Power Input:  
Connect the AEGOP5 power adapter to an AC outlet. Please refer to page 6 to determine the correct voltage in your area.  
8
9
 
AEGOp5 Operation  
AEGOp5 Operation  
The following pages provide information on the operation of  
AEGOP5. The AEGOP5 was purposely designed to be simple to  
operate with all functions available from the remote control.  
AEGOp5 Operation  
AEGOP5 Operation  
- Test Mode  
AEGOp5 Operation  
- Input Selection  
- Master Volume Control  
Volume Setting  
Test Mode  
Input Selection  
preset 1 preset 2 preset 3  
To increase or decrease the master  
volume of your AEGOP5, simply press  
VOL + or VOL - on the remote control.  
After connecting up to your source  
and speakers, you can press the  
TEST button on the remote to test the  
system. You can also use the test  
mode to test the location of the  
speakers. When the TEST button is  
pressed, white noise is generated  
through all satellite speakers in an  
order of Front Left, Centre, Front  
Right, Rear Left, and Rear Right  
channels for 2 seconds each. When  
completed, the AEGOP5 returns to  
Auto Decode mode.  
The AEGOP5 can be connected to up  
to 5 audio sources. Select the input  
source you want by repeatedly  
pressing the INPUT Button on the  
remote control until the desired  
source is selected.  
input  
power  
input  
power  
save1  
preset 4  
load  
Cen  
AEGOp5 Operation  
- LCD and LEDs  
mute  
test  
mute  
test  
BassManager  
SL/SR  
balance  
delay  
prologic  
balance  
delay  
prologic  
SW  
field  
EQ on/off EQ setup  
field  
EQ on/off EQ setup  
VOL  
D Time  
1. Press the power button to turn the AEGOP5 on,  
DRC  
reset  
press it again to turn it off.  
preset 1 preset 2 preset 3  
preset 1 preset 2 preset 3  
Example:  
Volume being decreased  
by 3 decibels.  
save1  
preset 4  
load  
Cen  
save1  
preset 4  
load  
Cen  
2. When power is turned off but still connected to the mains:  
a. LCD display and Speaker Configuration LEDs are off.  
b. Decoder status and user configurations are stored.  
c. Once the power is turned on again, AEGOP5 will resume  
to its previous decoder status and user configurations.  
BassManager  
SL/SR  
BassManager  
SL/SR  
SW  
SW  
DOLBY DIGITAL CO  
VOLUME -03DB  
VOL  
D Time  
VOL  
D Time  
DRC  
DRC  
3. When power is turned off and the unit unplugged from the mains:  
a. LCD display and Speaker Configuration LEDs are off.  
b. Decoder status and user configurations are not stored.  
c. AEGOP5 will reset to factory defaults if the adaptor  
is reconnected to the mains.  
When test mode is running, the display shows information in a  
sequence as below:  
In the Digital Mode (Dolby Digital / DTS), you can manually select the  
audio input source either in coaxial or optical form depending on the  
input type.  
AEGOp5 Operation  
- Balance Setting  
DOLBY DIGITAL CO  
TEST L  
If “COAXIAL” is selected, the display shows the following information:  
Balance Button  
AEGOp5 Operation  
- LCD Display  
You can set the volume setting of each  
individual channel.  
DOLBY DIGITAL CO  
SURROUND  
DOLBY DIGITAL CO  
TEST C  
input  
power  
mute  
test  
Auto Decode Mode (Auto detection of input type)  
When AEGOP5 is turned on, it automatically detects and identifies the  
audio signal coming from source unit.  
balance  
delay  
prologic  
To select a channel, press BALANCE  
button on the remote control  
repeatedly until the desired channel is  
reached.  
If Opticalis selected, display of AEGOP5 shows  
the following information:  
DOLBY DIGITAL CO  
TEST R  
field  
EQ on/off EQ setup  
preset 1 preset 2 preset 3  
DOLBY DIGITAL OP  
SURROUND  
save1  
preset 4  
load  
Cen  
Playing a DVD title with Dolby Digital (AC3) format,  
the display shows the following information.  
DOLBY DIGITAL CO  
TEST SL  
Adjust volume on selected channel by  
pressing VOL + or VOL - on the remote  
control.  
BassManager  
SL/SR  
In the PCM mode, you can switch between 3 audio input sources  
such as CD Player, VCR, game consoles etc. (See page 8 or page 9  
for reference). The display shows the following information:  
SW  
DOLBY DIGITAL CO  
SURROUND  
DOLBY DIGITAL CO  
TEST SR  
VOL  
D Time  
DRC  
reset  
Example:  
Playing a DVD title with DTS format, the display shows  
the following information.  
PCM  
STEREO  
LINEIN  
Press the BALANCE button once to display  
the current balance volume for  
channel L (Left).  
DTS COAXIAL  
SURROUND  
PCM  
STEREO  
AUX1  
AEGOp5 Operation  
- Mute Mode  
DOLBY DIGITAL CO  
BALANCE L 0DB  
Playing DVD, CD, LD, VCR and games consoles connected to the  
analog inputs (LINE, AUX1 and AUX2), the display shows  
the following information.  
Mute Mode  
Pressing MUTE Button on the remote  
control will mute all signal outputs  
(including the multipin and 6 RCA  
connectors.)  
PCM  
STEREO  
AUX2  
Press the BALANCE button again to select  
the next channel.  
input  
power  
PCM LINEIN  
STEREO  
DOLBY DIGITAL CO  
BALANCE R 0DB  
mute  
test  
balance  
delay  
prologic  
field  
EQ on/off EQ setup  
Press VOL + or VOL - will increase or  
To disable the mute function,  
press MUTE Button again.  
decrease the balance volume for selected channel.  
preset 1 preset 2 preset 3  
AEGOp5 Operation - Mode  
Selection  
save1  
preset 4  
load  
Cen  
DOLBY DIGITAL CO  
BALANCE R +0DB  
BassManager  
SL/SR  
Surround Processing Modes:  
SW  
The versatile AEGOP5 surround sound processor is capable of  
processing both the digital or analog audio signals from many  
different types of audio source. With the equipment connected  
correctly, AEGOP5 automatically detects the type of digital signal  
present at the digital input.  
VOL  
D Time  
DRC  
When MUTE Button is pressed,  
the display shows the following information:  
DOLBY DIGITAL CO  
SURROUND  
MUTE  
10  
11  
 
AEGOp5 Operation  
AEGOp5 Operation  
Pressing the SL or SR button, switches the surround  
channels on and off. The LCD will display the following:  
Press the DELAY Button will display the current  
delay time for channel LS.  
AEGOp5 Operation  
- Pro Logic Mode  
AEGOp5 Operation  
- Delay Calibration  
DOLBY DIGITAL CO  
SPK SUR ON  
DOLBY DIGITAL CO  
Pro Logic Mode  
DELAY  
SL 5 MS  
Centre  
Subwoofer  
Your AEGOP5 will automatically switch to  
Pro Logic mode when it detects a Pro Logic  
signal. With other types of input signal, you  
can select the Dolby Pro Logic mode  
manually by pressing Pro Logic button on  
the remote. Repeatedly pressing the  
Pro Logic Button will switch the Pro Logic  
mode in between the following modes;  
AUTO, ALL PCM, ENABLE and DISABLE.  
Front  
Right  
Front  
Left  
input  
power  
Press the DELAY Button again will circle to next channel.  
DOLBY DIGITAL CO  
SPK SUR OFF  
mute  
test  
DOLBY DIGITAL CO  
balance  
delay  
prologic  
DELAY  
SR 5 MS  
Pressing the SW button, switches the subwoofer on and off.  
The LCD will display the following:  
field  
EQ on/off EQ setup  
Press the D TIME + or D TIME - button will increase or  
decrease the delay time for current channel.  
preset 1 preset 2 preset 3  
DOLBY DIGITAL CO  
SPK SW ON  
save1  
preset 4  
load  
DOLBY DIGITAL CO  
DELAY SR 6 MS  
BassManager  
SL/SR  
Cen  
SW  
Rear Left  
Rear Right  
DOLBY DIGITAL CO  
SPK SW OFF  
Bass Manager  
If a Pro Logic signal is detected, AEGOP5 will switch to Pro Logic  
mode automatically, and the display shows the following information:  
The recommended listening position is described below:  
AEGOp5 Operation - Time Delay  
Adjustment on Surround  
Speakers  
Pressing the BASS MANAGER button enables you to select from  
three different settings of Bass; Bass Config.1, Bass Config.2 and  
Bass Config.3. These selections will feed the bass signal  
below 120Hz to different speakers as described below.  
I Centre channel speaker should be placed the same distance as the  
left and right speakers from your listening position.  
DOLBY DIGITAL CO  
PROLOGIC AUTO  
Delay Calibration  
mute  
test  
If a stereo signal (either analog or digital) is detected, AEGOP5 will  
switch to stereo mode automatically. You can then convert the stereo  
mode to Pro Logic mode by pressing the Prologic button until you see  
the following on the display:  
I Rear left and right speakers should be placed behind your listening  
position and above ear level.  
Press DELAY Button and repeat to  
select the length of delay time for  
SL/SR/C channels.  
balance  
delay  
prologic  
Bass Config.1  
field  
EQ on/off EQ setup  
With this setting, the bass signal below 120Hz will be sent to the  
subwoofer; the LEDs on the front panel indicating SW will be red,  
and the LCD will show the following:  
preset 1 preset 2 preset 3  
I If speaker placement is restricted due to the physical environment  
of the room, delay calibration is sometimes necessary to achieve  
the ideal listening environment.  
save1  
preset 4  
load  
Cen  
The delay range for SL/SR is 0 to 15 ms  
and 0 to 5 ms for centre.  
DOLBY DIGITAL CO  
PROLOGIC ALL PCM  
DOLBY DIGITAL CO  
BASS CONFIG.1  
BassManager  
SL/SR  
SW  
I If the centre speaker can only be placed nearer to you than the left  
and right speakers, sound from the centre speaker will arrive  
before the sound from the left and right speakers. The difference in  
arrival time could may affect the sound quality and effect. Your  
AEGOP5 allows you to adjust the speaker time delay to compensate  
for this problem by increasing the delay time for the centre channel.  
Thus sound from the centre, left and right speakers will reach you  
at the same time. If your centre speaker is closer to your listening  
position than the left and right speakers, press DELAY button  
repeatedly until the centre channel is selected. To increase or  
decrease the delay time, press D TIME + or D TIME - until the  
desired delay is selected. The same procedure can be applied to  
adjust the delay time of rear surround speakers if necessary.  
Adjust the delay time on selected  
channel by pressing D TIME + or  
D TIME - on the remote control.  
DOLBY DIGITAL CO  
PROLOGIC ENABLE  
VOL  
D Time  
Bass Config.2  
DRC  
reset  
With this setting, the bass signal below 120Hz will be sent to front left  
and right speakers and the subwoofer; the LEDs on the front panel  
indicating L/R/SW will be red, and the LCD will show the following  
information:  
If you want to convert Pro Logic or 2-channel Dolby Digital signal into  
Stereo mode, you can press the Prologic button until you see the  
following on the display:  
Surround Speaker Delay  
Delay calibration for the rear surround  
speakers may be necessary if the surround speakers are placed quite  
close to your listening position. To correct the delay this may cause,  
press the DELAY button repeatedly until SL or SR appear on the  
display. Increase the time delay of the surround speakers by pressing  
D TIME + until you are able to hear a 3D sound effect coming from  
surround speakers.  
DOLBY DIGITAL CO  
BASS CONFIG.2  
DOLBY DIGITAL CO  
PROLOGIC DISABLE  
Bass Config.3  
With this setting, the bass signal below 120Hz will be sent to all the  
speakers; the LEDs on the front panel indicating L/R/SL/SR/SW  
channels will be red and the LCD will show the following information:  
AEGOp5 Operation - Speaker  
Mode with Bass Manager  
Press DELAY Button again to move to the next channel.  
DOLBY DIGITAL CO  
BASS CONFIG.3  
Speaker Mode with Bass Manager  
field  
EQ on/off EQ setup  
DOLBY DIGITAL CO  
The six LEDs on front panel of your AEGOP5  
represent the six discrete audio channels  
(Left, Right, Centre, Rear Left, Rear Right  
and Sub). If a particular channel is active,  
the LED will light up in green. The LED will  
be red if that particular channel carries  
bass signal below 120Hz.  
DELAY  
SL 5 MS  
AEGOp5 Operation - Time Delay  
Adjustment on Centre Channel  
Speaker  
preset 1 preset 2 preset 3  
Bass Config. Off  
save1  
preset 4  
load  
Cen  
With this setting, the bass signal below 120Hz will be sent to all  
the speakers; the LEDs on front panel of AEGOP5 indicating  
L/R/C/SL/SR/SW channels will be red and the LCD will show the  
following information:.  
DOLBY DIGITAL CO  
DELAY SR 5 MS  
BassManager  
SL/SR  
Delay Calibration  
mute  
test  
SW  
Press D TIME + or D TIME - to increase or decrease  
the delay time for the selected channel.  
Press the DELAY button and repeat to  
select the length of delay time for the  
Rear Left (SL), Rear Right (SR) and  
Centre(C) channels.  
balance  
delay  
prologic  
VOL  
D Time  
DRC  
reset  
DOLBY DIGITAL CO  
BASS CONFIG.OFF  
field  
EQ on/off EQ setup  
DOLBY DIGITAL CO  
DELAY SR 6 MS  
preset 1 preset 2 preset 3  
Speaker Mode  
Pressing the CEN button, switches the  
centre channel on and off. The LCD will  
display the following:  
save1  
preset 4  
load  
Cen  
The delay range for SL/SR is 0 to 15  
ms and 0 to 5 ms for centre.  
BassManager  
SL/SR  
SW  
DOLBY DIGITAL CO  
VOL  
D Time  
DRC  
reset  
Adjust the delay time for the selected  
channel by pressing D TIME + or D  
TIME - on the remote control.  
SPK C  
ON  
DOLBY DIGITAL CO  
SPK C OFF  
12  
13  
 
AEGOp5 Operation  
AEGOp5 Operation  
Press the EQ SETUP button to display the current  
setting of EQ Band 1.  
AEGOp5 Operation  
- Saving Presets  
AEGOp5 Operation  
- Resetting  
AEGOp5 Operation  
- Sound Field Processing  
DOLBY DIGITAL CO  
EQ BAND 1 0DB  
save1  
preset 4  
load  
Cen  
Setting Presets  
Resetting  
DSP Sound Field  
Your AEGOP5 is equipped with a sound  
field processor that gives you six  
different field effects; Disable, Hall,  
Theater, Stadium, Club, and Church. By  
pressing Field button on the remote,  
you can select any of these effects. You  
can also increase or decrease the  
Reverb value from 0 - 9 by pressing  
VOL + or VOL - on the remote control  
whilst you are selecting the field effect.  
The AEGOP5 enables you to customise  
up to 4 settings. This function enables  
you to save and load your favourite  
settings at any time.  
Your AEGOP5 can be reset to its factory  
default settings by pressing RESET button  
on the remote.  
BassManager  
SL/SR  
input  
power  
input  
power  
Press the EQ SETUP button again to select next EQ Band.  
SW  
mute  
test  
mute  
test  
DOLBY DIGITAL CO  
EQ BAND 2 0DB  
VOL  
D Time  
DRC  
reset  
balance  
delay  
prologic  
balance  
delay  
prologic  
field  
EQ on/off EQ setup  
field  
EQ on/off EQ setup  
Press the Vol+ or Vol- button to increase or decrease  
the volume for current EQ Band.  
Saving a Preset:  
Press the PRESET 1 button, the display  
will show the following:  
preset 1 preset 2 preset 3  
preset 1 preset 2 preset 3  
Press the RESET button to reset the  
AEGOP5 to its factory default settings.  
save1  
preset 4  
load  
Cen  
save1  
preset 4  
load  
Cen  
DOLBY DIGITAL CO  
EQ BAND 2 +01DB  
BassManager  
SL/SR  
BassManager  
SL/SR  
DOLBY DIGITAL CO  
PRESET 1  
DOLBY DIGITAL CO  
RESET TO FACTORY  
SW  
SW  
Press EQ SETUP button to store the new EQ setting.  
VOL  
D Time  
VOL  
D Time  
DRC  
Press the SAVE button to save all the  
current decoder settings into Preset 1.  
When completed, your AEGOP5 reverts  
to Auto Decode mode.  
Press the Field button and repeat to  
change the current setting of Sound Field mode.  
Press EQ ON/OFF button to switch the new EQ settings on or off.  
DOLBY DIGITAL CO  
PRESET 1 SAVING  
DOLBY DIGITAL CO  
SURROUND  
DOLBY DIGITAL CO  
DIABLE REVERB 0  
DOLBY DIGITAL CO  
PRESET 1 SAVED  
DOLBY DIGITAL CO  
AEGOp5 Operation - DRC  
(Dynamic Range Compression)  
HALL  
REVERB 3  
When complete, your AEGOP5 will revert back to Auto Decode mode.  
DRC  
DOLBY DIGITAL CO  
THEATRE REVERB 3  
Your AEGOP5 features Dynamic Range  
DOLBY DIGITAL CO  
input  
power  
Compression (DRC), its sophisticated  
technology creates realistic sound fields  
with richly detailed sound that is  
remarkably free from distortion.  
Repeatedly pressing DRC button will  
switch between 3 modes:  
mute  
test  
DOLBY DIGITAL CO  
STADIUM REVERB 3  
balance  
delay  
prologic  
field  
EQ on/off EQ setup  
DOLBY DIGITAL CO  
preset 1 preset 2 preset 3  
AEGOp5 Operation  
- Loading Preset  
CLUB  
REVERB 3  
save1  
preset 4  
load  
Cen  
NONo compression is applied to the  
original audio signal, this provides the  
greatest dynamic range.  
BassManager  
SL/SR  
Loading a Preset  
You can load a previously saved preset  
by pressing LOAD button on the  
remote.  
DOLBY DIGITAL CO  
CHURCH REVERB 3  
SW  
input  
power  
VOL  
D Time  
DRC  
reset  
mute  
test  
HALFPartial compression is applied, this  
function is useful if AEGOP5 is connected  
to an external amplifier.  
balance  
delay  
prologic  
Loading a Preset:  
AEGOp5 Operation  
- Equalization  
field  
EQ on/off EQ setup  
Press any of the 4 preset buttons,  
(PRESET 1, PRESET 2, PRESET 3 or  
PRESET 4), the display will show  
the following:  
preset 1 preset 2 preset 3  
FULLFull compression is applied, this function is useful  
if AEGOP5 is connected to an external amplifier.  
save1  
preset 4  
load  
Cen  
5-Band Equalization  
Your AEGOP5 features a 5-band equalizer  
which enables you to fine tune the sound  
of your favourite movie or music. Press  
EQ SETUP button on the remote to  
activate it. Repeatedly pressing EQ SETUP  
button will switch between the 5 bands.  
BassManager  
SL/SR  
input  
power  
DOLBY DIGITAL CO  
PRESET 1  
SW  
Press the DRC button to display the current setting of Dynamic  
Range Compression mode.  
mute  
test  
VOL  
D Time  
DRC  
balance  
delay  
prologic  
Press LOAD button to load the preset.  
DOLBY DIGITAL CO  
field  
EQ on/off EQ setup  
DYNAMIC  
NO  
DOLBY DIGITAL CO  
PRESET 1 LOADING  
preset 1 preset 2 preset 3  
Press the DRC button again to switch between the DRC modes.  
save1  
preset 4  
load  
Cen  
Each band of the equalizer enables you to  
adjust your desired volume to a maximum  
of 10dB. Press VOL + or VOL - on the  
remote control to adjust the volume.  
DOLBY DIGITAL CO  
BassManager  
SL/SR  
DOLBY DIGITAL CO  
PRESET 1 LOADED  
DYNAMIC  
FULL  
SW  
VOL  
D Time  
DRC  
reset  
When preset loading is complete, your AEGOP5 will revert back to  
Auto Decode mode.  
DOLBY DIGITAL CO  
DYNAMIC HALF  
After setting the desired volume for each  
EQ band, you  
DOLBY DIGITAL CO  
press EQ SETUP button again to store the  
new setting for that band.  
Press EQ ON/OFF button to switch the new EQ settings on or off.  
14  
15  
 

3M Air Cleaner 718 User Manual
3M Musical Instrument Amplifier KD45 User Manual
Allied Telesis Network Router AR415S User Manual
Alto Shaam Double Oven 1000 SK I User Manual
Amana Refrigerator ATF1822MRE01 User Manual
American Standard Multi tool 2004 User Manual
Banner Automobile Accessories EZ LIGHT User Manual
BC Speakers Portable Speaker DE1050 User Manual
Beko Dishwasher DW603 User Manual
Eureka Tents Tent Headquarters User Manual