AMX Switch NXC NH HS HE User Manual

Quick Start Guide  
NetLinx Hub Cards and Modules NXC-NH/HS/HE  
Specifications (Cont.)  
Overview - NetLinx Hub Cards and Modules  
NetLinx Hub Cards distribute ICSP (Internet Control System Protocol)  
throughout a NetLinx control system. ICSP packets can move easily between  
different kinds of networks including Ethernet, Internet, and the NetLinx (ICSNet)  
control bus.  
ICSHub IN/OUT:  
NXC-NH  
RJ-45 connectors that supply data to other ICSHubs connected  
to the Master Card. The OUT port of one ICSHub must be  
connected to the IN connector of a downstream ICSHub Module  
or card.  
Yellow LEDs blinks when receiving data on the associated IN/  
The NetLinx Hub Cards covered in this document are:  
OUT ports.  
NXC-HE  
RJ-45 connectors that supply data to other Hubs connected to  
the Master Card, and wired using a daisy-chain configuration.  
The ICSHub OUT connector of one Hub must be connected to  
the ICSHub IN connector on the downstream Hub.  
Yellow LEDs blink when receiving data on the associated IN/OUT  
ports.  
NXC-NH ICSNet Hub Card (FG2060)  
NXC-HS ICSHub Server Card (FG2061)  
NXC-HE ICSHub Expander Card (FG2062)  
The NXS-MHS Modules (FG2009) provide enclosures for the Hub Cards. The  
NetLinx ICSNet control network branches from a NetLinx Master to ICSNet  
devices via ICSHub data links. An ICSNet Hub Card can then distribute data and  
power to up to eight system devices through multiple ICSNet wiring runs. Each  
ICSNet wiring run can support up to 16 devices connecting from one to another,  
in a daisy-chain fashion. FIG. 1 shows a sample application using a connection  
from the Master to the ICSNet Hub Card, then to external ICSNet devices. .  
Optional Accessories:  
NXM-MHS module  
Metal with black matte finish·  
Plastic gray faceplate with translucent viewing window.  
12 VDC power supply  
PS2.8 (FG423-05)  
PSN6.5 (FG423-41)  
Rack Kit  
AC-RK Accessory (FG515)  
1.5" x 5.0" x 8.8" (45 mm x 127 mm x 224 mm)  
26 oz (737 g)  
Dimensions (HWD):  
Weight:  
NXC-NH ICSNet Hub Card  
The NXC-NH ICSNet Hub Card provides eight ICSNet ports. FIG. 2 shows its  
rear panel components. This card connects to external ICSNet devices.  
NXC-NH  
ICSNet Hub  
IN  
ICSHub IN/OUT  
connectors and LEDs  
12VDC  
OUT  
PWR  
ICSNet  
ICSHub  
ICSNet OUT connectors and LEDs  
Power Supply indicator LED (green)  
12 VDC Power Supply connector  
FIG. 2 NXC-NH Card (shown mounted in NXM-MHS Module - rear view)  
Rear Panel LEDs  
FIG. 3 shows the layout of the ICSNet and ICSHub LEDs.  
FIG. 1 Sample ICSNet Hub Card Daisy-chain configuration  
ICSHub IN LED (yellow):  
lights to indicate data  
input activity on this port  
ICSHub and ICSNet links can extend up to 1,000 feet (304.8 m). Each link is fully  
regenerated at every ICSHub connection to allow systems to connect over  
virtually unlimited distances. Hub Cards can be installed in an NXI (NetLinx  
Integrated Controller), NXF (CardFrame), or NXM-MHS (Module) for stand-alone  
operation.  
ICSNet LEDs (yellow):  
light to indicate data  
output activity on  
these ports  
IN  
ICSHub IN LED  
OUT  
(yellow): lights to  
indicate data transfer  
activity on this port  
ICSNet  
ICSHub  
Specifications  
FIG. 3 Layout of the ICSNet and ICSHub IN/OUT LEDs  
Specifications  
Power Requirements:  
NXC-HS ICSHub Server Card  
NXC-NH - 180 mA @ 12 VDC  
NXC-HS - 160 mA @ 12 VDC  
NXC-HE - 110 mA @ 12 VDC  
The NXC-HS Server Card provides nine ICSHub OUT ports for connecting  
NetLinx Controllers and Hubs, and one ICSHub IN port. FIG. 4 shows its rear  
panel components. This card connects to either ICSNet Hubs or other Hub  
servers.  
PWR connector/LED:  
2-pin 12 VDC power connector (green); supply depends on load.  
Green LED lights to indicate power.  
ICSNet OUT (NXC-NH):  
Eight RJ-45 connectors that supply power and data to external  
ICSNet devices. Max. current draw = 500 mA.  
Yellow LEDs (one per port) blink when sending data on the  
associated port(s).  
NXC-HS  
ICSHub  
ICSHub Server  
ICSHub OUT (NXC-HS):  
ICSHub IN: NXC-HS  
Nine RJ-45 ports for ICSHub data.  
IN  
IN/OUT  
Yellow LEDs blink when receiving data on the associated OUT  
ports.  
12VDC  
connectors  
OUT  
and LEDs  
RJ-45 connector that supplies data to other NetLinx Controllers and  
Hubs, and wired using a daisy-chain configuration. The OUT port of  
one ICSHub must be connected to the IN connector of a  
downstream ICSHub Module or Card.  
PWR  
ICSHub OUT  
ICSHub  
ICSHub OUT connectors and LEDs  
Power Supply indicator LED (green)  
12 VDC Power Supply connector  
Yellow LED blinks when receiving data.  
FIG. 4 NXC-HS Card/Module (shown mounted in NXM-MHS Module - rear view)  
 

Acer Computer Monitor Aspire L200 User Manual
Aiphone Intercom System IC 1ADU User Manual
Alpine GPS Receiver INA W910R User Manual
Audiovox Stereo System 128 5971 User Manual
Axis Communications Clock Radio Q2901 E User Manual
BC Speakers Portable Speaker WG400 User Manual
Behringer Digital Camera BUC400 User Manual
Beko Oven UR584APS User Manual
Beko Refrigerator GNE V120P User Manual
Beko Refrigerator SN 142030 User Manual