|
A81000TNX0
EN FREEZER
USER MANUAL
Contents
3
CONTENTS
4 Safety information
7 Control panel
9 First use
9 Daily use
9 Helpful Hints and Tips
10 Care and cleaning
12 What to do if…
14 Technical data
14 Installation
18 Environmental concerns
The following symbols are used in this user
manual:
Important information concerning your
personal safety and information on how to
avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without notice
4
Safety information
SAFETY INFORMATION
In the interest of your safety and to ensure the correct use, before installing and first using
the appliance, read this user manual carefully, including its hints and warnings. To avoid
unnecessary mistakes and accidents, it is important to ensure that all people using the ap-
pliance are thoroughly familiar with its operation and safety features. Save these instruc-
tions and make sure that they remain with the appliance if it is moved or sold, so that ev-
eryone using it through its life will be properly informed on appliance use and safety.
For the safety of life and property keep the precautions of these user's instructions as the
manufacturer is not responsible for damages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by persons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person re-
sponsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging well away from children. There is risk of suffocation.
• If you are discarding the appliance pull the plug out of the socket, cut the connection
cable (as close to the appliance as you can) and remove the door to prevent playing chil-
dren to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic door seals is to replace an older appliance having a
spring lock (latch) on the door or lid, be sure to make that spring lock unusable before
you discard the old appliance. This will prevent it from becoming a death trap for a child.
General safety
CAUTION!
Keep ventilation openings clear of obstruction.
• The appliance is intended for keeping foodstuff and/or beverages in a normal household
as explained in this instruction booklet.
• Do not use a mechanical device or any artificial means to speed up the thawing process.
• Do not use other electrical appliances (such as ice cream makers) inside of refrigerating
appliances, unless they are approved for this purpose by the manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appli-
ance, a natural gas with a high level of environmental compatibility, which is neverthe-
less flammable.
During transportation and installation of the appliance, be certain that none of the com-
ponents of the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition
– thoroughly ventilate the room in which the appliance is situated
Safety information
5
• It is dangerous to alter the specifications or modify this product in any way. Any damage
to the cord may cause a short-circuit, fire and/or electric shock.
WARNING!
Any electrical component (power cord, plug, compressor) must be replaced by a certified
service agent or qualified service personnel to avoid hazard.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not squashed or damaged by the back of the appli-
ance. A squashed or damaged power plug may overheat and cause a fire.
3. Make sure that you can come to the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of elec-
tric shock or fire.
You must not operate the appliance without the lamp cover1) of interior lighting.
6.
• This appliance is heavy. Care should be taken when moving it.
• Do not remove nor touch items from the freezer compartment if your hands are damp/
wet, as this could cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct sunlight.
Bulb lamps2) used in this appliance are special purpose lamps selected for household ap-
•
pliances use only. They are not suitable for household room illumination.
WARNING!
Do not place frozen food on the worktop since cold and vapour may produce water con-
densate within its inner side. The resulting drip liquid may cause malfunctions. Therefore,
do not place nor leave frozen items of any kind on the worktop.
Daily Use
• Do not put hot pot on the plastic parts in the appliance.
• Do not store flammable gas and liquid in the appliance, because they may explode.
Do not place food products directly against the air outlet on the rear wall.3)
•
• Frozen food must not be re-frozen once it has been thawed out.
• Store pre-packed frozen food in accordance with the frozen food manufacturer's in-
structions.
• Appliance's manufacturers storage recommendations should be strictly adhered to. Refer
to relevant instructions.
• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure
on the container, which may cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if consumed straight from the appliance.
1) If the lamp cover is foreseen.
2) If the lamp is foreseen.
3) If the appliance is Frost Free.
6
Safety information
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the mains plug from the
mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
• Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat
may damage the plastic interior, and humidity could enter the electric system making it
live.
Installation
For electrical connection carefully follow the instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages on it. Do not connect the appli-
ance if it is damaged. Report possible damages immediately to the place you bought it.
In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil
to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to overheat-
ing. To achieve sufficient ventilation follow the instructions relevant to installation.
• Wherever possible the back of the product should be against a wall to avoid touching or
catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
Connect to potable water supply only. 4)
•
Service
• Any electrical work required to do the servicing of the appliance should be carried out by
a qualified electrician or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine spare
parts must be used.
Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The appliance shall not be discarded together
with the urban refuse and rubbish. The insulation foam contains flammable gases: the ap-
pliance shall be disposed according to the applicable regulations to obtain from your local
authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchang-
er. The materials used on this appliance marked by the symbol
are recyclable.
4) If a water connection is foreseen.
Control panel
7
CONTROL PANEL
1
2
3
4
5
6
7
8
9
1 Green ON/OFF Indicator Light
2 ON/OFF Button
3 Temperature Regulator Button (for higher temperatures)
4 Display (shows the set temperature)
5 Temperature Regulator Button (for lower temperatures)
6 Red ALARM Indicator Light
7 ALARM STOP Button
8 Yellow SUPER function Indicator Light
9 SUPER Button
Switching on
• Allow the appliance to stand for 4 hrs after installation.
• Insert the plug into the wall socket.
• Press the ON/OFF Button (not necessary to press at the first switching on).
• The Green ON/OFF Indicator Light will light up continuously.
• The lighting up of the Green ON/OFF Indicator Light means that the appliance is switched
on.
• The blinking of the Red ALARM Indicator Light and the Acoustic Alarm means an improp-
er temperature in the freezer.
• To switch off the Acoustic Alarm and the Temperature Display flashing, press ALARM
STOP Acoustic Alarm OFF Button.
• When switching on the freezer for the first time, the Red ALARM Indicator Light will
blink until the internal temperature has reached a level required for the safe conserva-
tion of frozen food.
If the ALARM STOP button is not pressed then the acoustic alarm will break off after ap-
prox. one hour. The Red ALARM Indicator Light will continue to flash. Press the ALARM
STOP button.
Switching off
• Press the ON/OFF Button for appr. 3 seconds.
• The Green ON/OFF Indicator Light and the Display switches off.
• To disconnect the appliance from the power disconnect the mains plug from the wall
socket.
8
Control panel
Temperature regulation
The set temperature of the freezer may be adjusted by pressing the Temperature Regulator
Buttons.
Set default temperature -18 °C, it is optimal for food storage.
The Display shows the set temperature.
The set temperature will be reached within 24 hours.
Fluctuations of some degrees around set temperature are normal and does not mean any
fault in the appliance.
After a power failure the set temperature remains stored.
Red ALARM Indicator Light
Under normal operating conditions, the internal temperature of the freezer will ensure the
long-term conservation of the stored food.
When such temperature rises above a certain level (-12 °C, for example due to an earlier
power failure), the appliance will trigger an acoustic and light alarm. The light alarm is a
blink red light (Red ALARM Indicator Light), while the acoustic alarm is an intermittent
sound.
• You can stop the acoustic alarm by pressing the ALARM STOP Button.
• The acoustic alarm switches off.
• The freezer Display shows the highest temperature reached for a few seconds. Then show
again the set temperature.
The Red ALARM Indicator Light continues to flash until the internal temperature has
reached a level required for the safe conservation of frozen food.
Quick Freeze FROSTMATIC function
If more than 3-4 kg of food is to be frozen:
1. Press the SUPER Quick Freeze Button for 2-3 seconds to activate the FROSTMATIC func-
tion 6-24 hours before placing the fresh food in the freezer, the Yellow SUPER Indicator
Light will illuminate. The compressor will now run continuously, to ensure that the
fresh food is frozen as quickly as possible.
2. It is possible to deactivate the function at any time by pressing the SUPER Quick Freeze
Button.
3. Place the food in the freezing compartment or compartments (indicated with graphics)
and leave the FROSTMATIC function for a further 24 hours.
4. Then push the SUPER Quick Freeze Button again (the Yellow SUPER Indicator Light will
go out).
5. Move frozen food from the freezing compartments into the other compartments (stor-
ing compartments) to make room for another freezing.
If the SUPER Quick Freeze Button is accidentally left on, the freezer will not be damaged,
but energy will be wasted and it will be automatically switched off 52 hours later. The SU-
PER Indicator Light will also go out.
First use
9
FIRST USE
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand-
new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.
DAILY USE
Freezing fresh food
The freezer compartments (indicated with graphics) are suitable for freezing fresh food and
storing frozen and deep-frozen food for a long time.
To freeze fresh food activate the SUPER Quick Freeze function.
The maximum amount of food that can be frozen in 24 hours is specified on the rating
plate, a label located on the inside of the appliance.
The freezing process lasts 24 hours: during this period do not add other food to be frozen.
Storage of frozen food
When first starting-up or after a period out of use, before putting the products in the com-
partment let the appliance run at least 2 hours on the higher settings.
In the event of accidental defrosting, for example due to a power failure, if the power has
been off for longer than the value shown in the technical characteristics chart under "rising
time", the defrosted food must be consumed quickly or cooked immediately and then re-
frozen (after cooling).
Thawing
Deep-frozen or frozen food, prior to being used, can be thawed at room temperature.
Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking
will take longer.
HELPFUL HINTS AND TIPS
Normal Operating Sounds
• You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped
through the coils or tubing. This is correct.
• When the compressor is on, the refrigerant is being pumped around and you will hear a
whirring sound and a pulsating noise from the compressor. This is correct.
• The thermic dilatation might cause a sudden cracking noise. It is natural, not dangerous
physical phenomenon. This is correct.
• When the compressor switches on or switches off, you will hear a faint "click" of the
temperature regulator. This is correct.
10
Care and cleaning
Hints for freezing
To help you make the most of the freezing process, here are some important hints:
• the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating
plate;
• the freezing process takes 24 hours. No further food to be frozen should be added during
this period;
• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;
• prepare food in small portions to enable it to be rapidly and completely frozen and to
make it possible subsequently to thaw only the quantity required;
• wrap up the food in aluminium foil or polythene and make sure that the packages are
airtight;
• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a
rise in temperature of the latter;
• lean foods store better and longer than fatty ones; salt reduces the storage life of food;
• water ices, if consumed immediately after removal from the freezer compartment, can
possibly cause the skin to be freeze burnt;
• it is advisable to show the freezing in date on each individual pack to enable you to keep
tab of the storage time.
Hints for storage of frozen food
To obtain the best performance from this appliance, you should:
• make sure that the commercially frozen foodstuffs were adequately stored by the retail-
er;
• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the
shortest possible time;
• not open the door frequently or leave it open longer than absolutely necessary.
• Once defrosted, food deteriorates rapidly and cannot be refrozen.
• Do not exceed the storage period indicated by the food manufacturer.
CARE AND CLEANING
CAUTION!
Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must
therefore only be carried out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water and some neutral soap.
• regularly check the door seals and wipe clean to ensure they are clean and free from
debris.
• rinse and dry thoroughly.
Care and cleaning
Do not pull, move or damage any pipes and/or cables inside the cabinet.
11
Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes
to clean the interior as this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a
brush or a vacuum cleaner. This operation will improve the performance of the appliance
and save electricity consumption.
Take care of not to damage the cooling system.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the
plastics used in this appliance. For this reason it is recommended that the outer casing of
this appliance is only cleaned with warm water with a little washing-up liquid added.
After cleaning, reconnect the equipment to the mains supply.
Defrosting of the freezer
The freezer compartment of this model, on the other hand, is a "no frost" type. This means
that there is no buildup of frost when it is in operation, neither on the internal walls nor on
the foods.
The absence of frost is due to the continuous circulation of cold air inside the compart-
ment, driven by an automatically controlled fan.
No-Frost technology
In order to facilitate the removal of the ice layer, the evaporator is assisted by electric heat-
ing during the defrosting procedure. The ventilator is in OFF position. The defrost water will
drip in the tray placed at the compressor and will evaporate. In the course of the defrosting
procedure (approx. 30 minutes) the evaporator becomes warm but it has no influence on
the internal temperature.
The foods should be kept well-packed in order to avoid any moisture loss as a result of air
circulation.
Do not obstruct the vent holes.
It is recommended to put all foods in the baskets in the freezer compartment.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
1. disconnect the appliance from electricity supply
2. remove all food
3. clean the appliance and all accessories
4. leave the lid open to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food
inside from spoiling in case of a power failure.
12
What to do if…
WHAT TO DO IF…
WARNING!
Before troubleshooting, disconnect the mains plug from the mains socket.
Only a qualified electrician or competent person must do the troubleshooting that is not in
this manual.
There are some sounds during normal use (compressor, refrigerant circulation).
The appliance operates discontinuously, so the stopping of compressor does not mean be-
ing no current. That is why you must not touch the electrical parts of the appliance before
breaking the circuit.
Problem
Possible cause
Solution
The appliance is noisy
The appliance is not supported
properly
Check if the appliance stands sta-
ble (all the four feet should be on
the floor)
The compressor operates
continually
The thermostatic control is set
incorrectly
Set a warmer temperature
Doors are not shut properly or
do not close tightly
Check if the doors close well and
the gaskets are undamaged and
clean
The door has been opened too
frequently
Do not leave the door open lon-
ger than necessary
Large quantities of food to be
frozen were put in at the same
time
Wait some hours and then check
the temperature again
Food placed in the appliance
was too warm
Allow food to cool to room tem-
perature before storing
The room temperature is too
high.
Decrease the room temperature.
There is too much frost
and ice
Products are not wrapped prop- Wrap the products better
erly
Doors are not shut properly or
do not close tightly
Check if the doors close well and
the gaskets are undamaged and
clean
The Temperature regulator may Set a warmer temperature
be set incorrectly
It is too warm in the
freezer
Temperature regulator may be
set incorrectly
Set a lower temperature
The door does not close tightly
or it is not shut properly
Check if the door closes well and
the gasket is undamaged and
clean
What to do if…
13
Problem
Possible cause
Solution
Large quantities of food to be
frozen were put in at the same
time
Insert smaller quantities of food
to be frozen at any one time.
Food placed in the appliance
was too warm
Allow food to cool to room tem-
perature before storing.
Products to be frozen are placed Place the products in a way so
too closely to each other
that cold air could circulate
among them
It is too cold inside the
freezer
Temperature regulator may be
set incorrectly
Set a warmer temperature
The appliance does not
work at all. Neither cool-
ing nor lighting works
Plug is not connected to the
mains socket properly
Connect the mains plug properly
Power does not reach the appli- Try connecting another electrical
ance device to the power outlet
The appliance is not switched on Switch on the appliance
There is no voltage in the mains Call an electrician
socket (try to connect another
appliance into it)
The appliance does not
cool at all
Plug is not connected to the
mains socket properly
Connect the mains plug properly
There is no voltage in the mains Call an electrician
socket (try to connect another
appliance into it)
The appliance is not switched on Switch on the appliance
A rectangular symbol is
shown on the right side of
the Temperature Display
Temperature sensor problem
Call the service personnel
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.
14
Technical data
TECHNICAL DATA
Dimension
Height
Width
Depth
850 mm
595 mm
635 mm
13 h
Rising Time
Voltage
230-240 V
50 Hz
Frequency
The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.
INSTALLATION
WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the appli-
ance before installing the appliance.
Positioning
This appliance can be installed in a dry, well ventilated indoor (garage or cellar) also, but for
optimum performance install this appliance at a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the appliance:
Climate class
Ambient temperature
SN
N
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
ST
T
Levelling
When placing the appliance ensure that it stands
level. This can be achieved by two adjustable feet
at the bottom in front (2). If necessary adjust the
feet by removing the spacer (1).
1
2
Installation
15
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc. Ensure that air can circulate freely
around the back of the cabinet.To ensure best
performance, if the appliance is positioned below
an overhanging wall unit, the minimum distance
between the top of the cabinet and the wall unit
must be at least 100 mm . Ideally, however, the
appliance should not be positioned below over-
hanging wall units. Accurate levelling is ensured
by one or more adjustable feet at the base of the
cabinet. If the cabinet is placed in a corner and
the side with the hinges facing the wall, the dis-
tance between the wall and the cabinet must be at least 10 mm to allow the door to open
enough so that the shelves can be removed.
WARNING!
It must be possible to disconnect the appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
Door reversibility
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the doors of the appliance during the operations.
To change the opening direction of the door, do these steps:
1. Remove the plug from the power socket.
2. Tilt back the appliance carefully so that the compressor cannot touch the floor.
3. Unscrew both adjustable feet.
4. Unscrew the screws of the door bottom
hinge.
5. Take off the appliance door by pulling it
slightly downwards.
16
Installation
6. Unscrew the top door hinge pin of the
appliance then screw it back on the oth-
er side.
7. Fit the appliance door on the upper door
hinge pin.
8. Remove the lower hinge. Put over the
pin in the direction of the arrow.
9. Unscrew and install the screw on the
opposite side.
10. Install the lower hinge on the opposite
side leaving the position of the door un-
changed.
11. Screw in the one screw in the place set free on the other side as well as the adjustable
feet (2 pieces).
Remove and install the handle5) on the
12.
opposite side.
13. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the above mentioned operations, contact the nearest
After Sales Service Force. The After Sales Service specialist will carry out the reversibility of
the doors at your cost.
Electrical Connection
CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified
electrician or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
5) If foreseen
Installation
17
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow:
Brown:
Earth
Live
1
3
5
Blue:
Neutral
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
1. Connect the wire coloured green and yellow to the terminal marked either with the let-
ter “E“ or by the earth symbol
or coloured green and yellow.
2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or
coloured black.
3. Connect the wire coloured brown to the terminal either marked with the “L“ or col-
oured red.
4.
Check that no cut, or stray strands of wire is present and the cord clamp
over the outer sheath.
4
is secure
5. Make sure the electricity supply voltage is the same as that indicated on the appliance
rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp plug fitted
the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
2
. In the event of having to change
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it
is disposed of safely.
18
Environmental concerns
ENVIRONMENTAL CONCERNS
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
19
|