™
Scotchlok E-9BM Crimping Tool
812031
Application
The Scotchlok™ E-9BM Crimping Tool, with adjustable jaw inserts, crimps Scotchlok™ discrete type
connectors and is a maintenance tool for modular splicing.
Selection and Installation of Jaw Inserts
1.
Select the jaw insert combination to be used. See Table 1.
2.
Remove the jaw inserts from the jaw using a
screwdriver. See Figure 1.
3.
Install the jaw inserts in the positions selected by
pushing the tool firmly against a hard surface until they
snap into position.
TABLE 1
Connector Type
Jaw Inserts
All Scotchlok Butt and Tap type connectors
Thick - Thick
812032
UDW, UIB, UIR and UIY Inline connectors
Thick - Thin
Thick-Thin
All MS2™ Cross-Connect Modules, all Scotchlok
Inline connectors and all 4000 and 4008 Series
Modular connectors
Figure 1. Removal of jaw inserts
Super-Mini 4005 Bridge & 4005DPM Modules
Thin - Thin
May 1997
34-7015-5255-5-B
|